MAINTENANCE
REPLACING WHEELS
See Figure 16.
To replace a wheel:
Disconnect the mower from the power supply. �Turn the mower on its side.
Using a flat blade screwdriver, pry off the hubcap.
Remove the cotter pin from the wheel axle, then remove the wheel.
Replace with new wheel and insert new cotter pin to secure.
Replace hubcap.
STORING THE MOWER
See Figure 17.
Disconnect the mower from the power supply.
Turn mower on its side and clean grass clippings that have
accumulated on the underside of the mower deck.
Wipe the mower clean with a dry cloth.
�Check all nuts, bolts, knobs, screws, fasteners, etc., for tightness.
�Inspect moving parts for damage, breakage, and wear. Have repairs made on any damaged or missing parts.
Store mower indoors in a clean, dry place out of the reach of children.
Do not store near corrosive materials such as fertilizer or rock salt.
To lower the handle before storing:
Fully loosen the handle knobs on the sides of the handle and fold the upper handle down.
Push inward on each side of the lower handle, and lift the sides of the lower handle past the edges of the handle mounting brackets.
Fold the lower handle forward, making sure not to bend or kink the power cord.
Page 16
HUBCAP
COTTER PIN
WHEEL
WHEEL AXLE
Fig. 16
HANDLE KNOBS
UPPER
HANDLE
LOWER
HANDLE
HANDLE
MOUNTING
BRACKET
Fig. 17
