OPERATION
STARTING AND STOPPING
See Figure 12 - 13.
TO START A COLD ENGINE:
DO NOT squeeze the throttle trigger until the engine starts and runs.
nLay the trimmer on a flat, bare surface.
nPRIME - Press the primer bulb 7 times.
nSET the start lever to the START position.
nPULL the rope until the engine starts.
nAllow the engine to run for 15 seconds.
nSqueeze the throttle trigger.
NOTE: Squeezing the throttle trigger releases the start lever to the RUN position.
TO START A WARM ENGINE: PULL the rope until the engine starts.
TO STOP THE ENGINE:
Push and hold the STOP button until the engine stops.
STARTING
INSTRUCTION
LABEL
STOP
BUTTON
PRIMER BULB
THROTTLE
TRIGGER
Fig. 12
START LEVER
START
POSITION
START LEVER
RUN
POSITION
Fig. 13
Page 15
