ASSEMBLY

If your unit has been preassembled, check each step to make sure the unit has been properly assembled.

FRONT HANDLE

See Figure 2.

1.Remove the front handle, bolt, and wing nut from the Owner’s Kit.

2.Install the front handle onto the top side of the drive shaft housing and move it to a comfortable position.

3.Place the bolt through the front handle as shown, then install the wing nut.

4.Tighten wing nut securely.

GRASS DEFLECTOR WITHOUT EDGER GUIDE - TRIMLITE AND TRIM ‘N EDGE

See Figure 3.

1.Remove wing nut, flat washer, lock washer, and bolt from the Owner’s Kit.

2.Place grass deflector over shaft and bracket.

3.Install bolt through the slots in the tabs on grass deflec- tor and bracket on shaft housing.

4.Install flat washer, lock washer and wing nut.

5.Tighten Securely.

GRASS DEFLECTOR WITH EDGER GUIDE - TRIM ‘N EDGE ONLY

EDGER GUIDE ASSEMBLY

See Figure 4.

1.Assemble the two plastic pieces of the edger guide together using the short bolt, flat washer, lock washer and wing nut.

2.Slide the edger guide to adjust it to the desired trimming length.

3.Tighten the wing nut securely.

FRONT HANDLE

WING NUT

BOLT

BRACKET

EDGER GUIDE

PIECES

BOLT

Fig. 2

GRASS

DEFLECTOR

LOCK WASHER

FLAT

 

 

WASHER

WING NUT

Fig. 3

 

 

 

WING NUT

LOCK

WASHER

FLAT WASHER

SHORT BOLT

Fig. 4

Page 7

Page 6 Page 8
Page 7
Image 7
Homelite UT20763 manual Assembly, Front Handle, See Figure
Page 6 Page 8

UT20763 specifications

The Homelite UT20763 is a versatile and efficient electric pole saw that caters to homeowners and landscaping enthusiasts alike. With its focus on practicality and convenience, this tool is designed to make tree trimming and pruning tasks manageable and safe. The UT20763 features a powerful 8 Amp motor that provides ample cutting strength, allowing users to tackle branches up to 7 inches in diameter with ease.

One of the standout characteristics of the Homelite UT20763 is its lightweight design, weighing in at just around 8 pounds. This makes it easy to maneuver, especially when working at height or in awkward positions. The pole extends up to 8 feet, offering a reach of up to 15 feet when combined with the user's height, making it suitable for trimming tall trees without the need for ladders or cumbersome lifts.

The saw is equipped with a 10-inch bar and chain, which not only enhances cutting efficiency but also contributes to cleaner cuts, ensuring that the health of the tree is maintained. The automatic oiling system ensures that the bar and chain are well-lubricated during operation, minimizing wear and extending the life of the tool. Additionally, the translucent oil reservoir allows users to easily monitor oil levels, making maintenance simpler.

Safety is a key design feature of the UT20763. It comes with a protective guard that shields users from debris while in operation. The trigger switch is designed for easy operation and is accompanied by a safety lockout feature to prevent accidental starts, enhancing overall safety during use.

The Homelite UT20763 is part of a growing trend towards electric gardening tools, which are known for their eco-friendliness and reduced noise levels compared to gas-powered models. This pole saw emits zero emissions, making it an environmentally responsible option for those looking to maintain their lawns and gardens.

In summary, the Homelite UT20763 is a reliable electric pole saw ideal for homeowners seeking an efficient and user-friendly tool for tree maintenance. Its combination of a powerful motor, lightweight design, extendable reach, effective cutting capabilities, and emphasis on safety makes it a popular choice for outdoor enthusiasts looking to keep their yards in pristine condition. Whether you have small branches or larger limbs to trim, the UT20763 is built to simplify the task while promoting a greener approach to gardening and landscaping.
Top Page Image Contents