ASSEMBLY
ATTACHING THE GRASS DEFLECTOR
See Figure 4.
WARNING:
The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can result in serious personal injury.
Follow these steps to attach the grass deflector.
1.Slide the grass deflector onto the attachment shaft and fit it over the bracket.
2.Install the bolt through the holes in the tabs on the grass deflector and the slots in the bracket on the attachment shaft.
3.Install the flat washer, the lock washer, and the wing nut.
4.Tighten the wing nut securely.
5.Remove the protective packaging from the line cutting blade.
Page 9
GRASS | WING |
DEFLECTOR | NUT |
LINE
CUTTING
BLADE
BOLT
Fig. 4
