TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | SOLUTION |
|
|
|
Line will not advance when tap retaining cap
1.Line is welded to itself.
2.Not enough line on spool.
3.Line is worn too short.
4.Line is tangled on spool.
1.Lubricate with Homelite silicone spray.
2.Install more line (Refer to “Replacing the Cutting Line” earlier in this manual).
3.Pull lines while alternately pressing down on and releasing spool retainer.
4.Remove line from spool and rewind (Refer to “Replacing the Cutting Line” earlier in this manual).
Retaining cap is hard to turn | Screw threads are dirty or dam- |
| aged. |
Clean threads and lubricate with grease. If no improvement, replace spool retainer.
Grass wraps around the attachment shaft and the trimmer head assembly
Cutting tall grass at ground level. Cut tall grass from the top down.
Page 14
