
MAINTENANCE
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
See Figure 6.
Stop the motor.
Install padlock (not included) or 
Remove the screws securing motor housing cover, then remove cover.
Lift batteries from motor housing enough to expose leads and battery terminals.
Using wire cutters with rubber coated or insulated handles, clip the battery leads and remove the battery for disposal.
Remove padlock or 
To preserve natural resources, please recycle or dispose of batteries properly.
This product contains 
ordinary trash.
Consult your local waste authority for information regarding available recycling and/or disposal options.
WARNING:
Upon removal, cover the battery pack’s terminals with 
STORing the Grass shear
See Figure 7.
Install padlock (not included) or 
NOTE: Only a locked padlock with the key stored in an- other location can prevent unauthorized use of the grass shear.
Clean all foreign material from the grass shear. Store indoors in a dry, locked up 
Always place the sheath on the cutting blades before transporting or storing the unit.
Store the product where the temperature is below 80°F.
Store the product in a “discharged” condition.
NOTE: The 
Page 10 — English