IMPORTANT SAFETY INSTRUCTIONS

Use only authorized replacement parts and accessories and follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of shock or injury.

Maintain the unit per maintenance instructions in this Operator’s Manual.

Inspect the unit before each use for loose fasteners, fuel leaks, etc. Replace damaged parts.

SPECIFIC SAFETY RULES

WARNING:

When this generator is used to supply a building wiring system: generator must be installed by a quali- fied electrician and connected to a transfer switch as a separately derived system in accordance with NFPA 70, National Electrical Code. The generator shall be connected through a transfer switch that switches all conductors other than the equipment grounding con- ductor. The frame of the generator shall be connected to an approved grounding electrode. Failure to isolate the generator from power utility can result in death or injury to electric utility workers.

Do not use this generator to provide power for emergency medical equipment or life support devices.

This generator has a neutral bonded condition. This means the neutral conductor is electrically connected to the frame of the machine.

Exhaust contains poisonous carbon monoxide, a color- less, odorless gas. Breathing exhaust can cause loss of consciousness and can lead to death. If running in a confined or partially-enclosed area, the air may contain a dangerous amount of carbon monoxide. To keep ex- haust fumes from building up, always provide adequate ventilation.

Always use a battery-powered carbon monoxide detec- tor when running the generator. If you begin to feel sick, dizzy, or weak while using the generator, shut it off and get to fresh air immediately. See a doctor. You may have carbon monoxide poisoning.

Place the generator on a flat, stable surface with a slope of no more than 4°.

Operate in a well-ventilated, well-lit area isolated from working areas to avoid noise interference.

Operating the generator in wet conditions could result in electrocution. Keep the unit dry.

Keep the generator a minimum of 3 feet away from all types of combustible material.

Do not operate generator near hazardous material.

Do not operate generator at a gas or natural gas filling station.

Do not touch the muffler or cylinder during or immediately after use; they are HOT and will cause burn injury.

Do not allow the generator’s gas tank to overflow when filling. Fill to 1 in. below the top neck of the gasoline tank to allow for fuel expansion. Do not cover the fuel tank cap when the engine is running. Covering the fuel tank cap during use may cause engine failure and/or damage to the tool.

Do not smoke when filling the generator with gasoline.

Shut down the engine and allow to cool completely before adding gasoline or lubricant to the generator.

Do not remove the oil dipstick or the fuel tank cap when the engine is running.

Pay close attention to all safety labels located on the generator.

Keep children a minimum of 10 feet away from the gen- erator at all times.

The unit operates best in temperatures between 23°F and 104°F with a relative humidity of 90% or less.

Specific modifications for high-altitude performance are needed if the generator will always be operated at alti- tudes above 5,000 feet. Contact your nearest authorized service center for more information and to have these modifications performed.

Operating voltage and frequency requirement of all electronic equipment should be checked prior to plug- ging them into this generator. Damage may result if the equipment is not designed to operate within a +/- 10% voltage variation, and +/- 3 hz frequency variation from the generator name plate ratings. To avoid damage, al- ways have an additional load plugged into the generator if solid state equipment (such as a television set) is used. A power line conditioner is recommended for some solid state applications.

For outdoor use only.

Save these instructions. Refer to them frequently and use them to instruct others who may use this product. If you loan someone this product, loan them these instructions also.

Page 4 — English

Page 7 Page 9
Page 8
Image 8
Homelite UT903650 manuel dutilisation Specific Safety Rules, English
Page 7 Page 9

UT903650 specifications

The Homelite UT903650 is a versatile and powerful string trimmer that caters to both professional landscapers and DIY enthusiasts. Designed for optimal performance, this tool features a robust 25cc 2-cycle engine, which delivers ample power to tackle even the toughest grass and weeds. With its lightweight construction, the UT903650 ensures easy maneuverability, reducing user fatigue during extended use.

One of the standout features of the UT903650 is its Easy Start technology. This innovative system makes starting the engine a breezy affair, allowing users to get to work without the hassle often associated with traditional string trimmers. The trimmer is also equipped with a dual-line cutting system, which provides a wider cutting diameter, making it more efficient for clearing out larger areas in less time.

The trimmer's head features Auto Feed Spool technology, which automatically feeds the cutting line as needed. This eliminates the need for manual adjustments, ensuring consistent cutting performance, and reducing downtime. The inclusion of a rotating handle provides added flexibility, allowing for precise trimming and edging along flower beds and driveways.

For comfort during use, the UT903650 comes with an adjustable handle that caters to various user heights and preferences. This ergonomic design not only enhances comfort but also improves control over the trimmer. The lightweight design further adds to its user-friendliness, making it ideal for prolonged use without causing strain.

The Homelite UT903650 is also built with durability in mind. Its high-quality materials and reinforced structures allow it to withstand tough conditions, ensuring that it remains reliable season after season. Additionally, the trimmer meets stringent emission standards, making it an environmentally friendly choice for those who are conscious about their ecological footprint.

Overall, the Homelite UT903650 string trimmer is a robust, user-friendly tool packed with features that enhance its performance and ease of use. From professionals to homeowners looking for a reliable gardening tool, the UT903650 stands out as an excellent choice for maintaining a well-groomed lawn and garden. Whether tackling overgrown areas or performing routine maintenance, this trimmer is designed to deliver consistent results with efficiency and ease.
Top Page Image Contents