Gear Oil Check/Change
Oil level check
Check the oil level when engine is in the vertical position. Remove the level
bolt and see if oil flows out. If no oil comes out, fill through the drain bolt
hole until the oil starts to flow out through the level bolt hole. If there is
water in the oil, the water will flow out first when the drain bolt is removed,
or the oil will be a milky color.
Oil change
Remove the level bolt and drain bolt to drain the oil. Inject oil through the
drain bolt hole until it starts flowing out through the level bolt hole. Reinstall
and tighten the level bolt and drain bolt securely.
CAUTION: If water is detected in the oil, the unit should be inspected by an
authorized Honda dealer.
Recommended Oil: API standard (GL-4 or GL-5)
SAE 90 outboard motor gear oil
Oil capacity: 0.1 e (0.21 us pt)
GEAR OIL
LEVEL BOLT
GEAR OIL
DRAIN BOLT
28