
4. Motor Angle (In cruising)
Adjust the motor so the axis of the
propeller is parallel with the water
surface.
INCORRECT
CAUSES BOAT TO “SQUAT-
CORRECT
GIVES MAXIMUM PERFORMANCE
INCORRECT
CAUSES BOAT TO “PLOW’
5. Motor Angle Adjustment
If the propeller axis is not parallel
with the water surface, adjust bv
changing the adjusting rod position.
There are four adjusting stages.
1. Push the adjusting rod in (A),
twist upwards in (B) and pull out
to remove.
2. Inserting the rod in the proper
hole, twist it down to lock.
ADJUSTING ROD
ADJUSTING ROD
CAUTION: To prevent damage to TO ““~7
the motor or boat, make sure the
adjusting rod is locked.
LOCKED POSITION
9