
1. Disconnect the fuel line and install the cap on the engine fuel inlet. Firm-
ly close,the fuel cap vent knob.
IFUEL LINE CONNECTOR FUEL INLET /----xdA
CAP I f\‘
2. Loosen the carburetor drain screw, and drain the gasoline into a suitable
container. After draining, ,retighten the drain screw.
l
Be careful not to spill fuel. Spilled fuel or fuel vapor may ignite. If any
fuel is spilled, make sure the area is dry before storing or transporting the
motor.
l
Do not smoke or allow flames or sparks where fuel is drained or stored.
CAUTION: In cold weather, to prevent ice from forming inside the water
pump, pull the recoil starter several times to flush the water out.
DRAIN’SCREW
36