Honda Power Equipment FG110 Spark Arrester Service

SERVICING YOUR TILLER

Spark Arrester Service (Optional)

The spark arrester must be serviced every 100 hours

to keep it functioning as designed.

If the engine has been running, the muffler will be

very hot. Allow the muffler to cool before servicing

the spark arrester.

1. Loosen the 5 mm hex bolt, then remove the fan

cover.

2. Remove the 3 x 6 mm self-tapping screw from the

spark arrester, and remove the spark arrester

from the muffler.

3. Use a brush to remove carbon deposits from the

spark arrester screen. Be careful to avoid

damaging the screen.

The spark arrester must be free of breaks and

holes. Replace the spark arrester if it is damaged.

4. Install the spark arrester in the reverse order of

disassembly.

5. Install the fan cover, and tighten the 5 mm hex

bolt securely.

3 X 6 mm SELF-

TAPPING SCREW

SPARK

ARRESTER

MUFFLER

SPARK ARRESTER

SCREEN

Contents

Main OWNER'S MANUAL WARNING: INTRODUCTION Page CONTENTS 4 TILLER SAFETY IMPORTANT SAFETY INFORMATION TILLER SAFETY 5 ATTACHMENTS AND MODIFICATIONS IMPORTANT MESSAGE TO EMPLOYERS IMPORTANT MESSAGE TO PARENTS Page 7 CONTROLS & EQUIPMENT COMPONENT & CONTROL LOCATIONS 8 CONTROLS & EQUIPMENT DESCRIPTION OF CONTROLS Throttle Lever Engine Switch Choke Lever CONTROLS & EQUIPMENT 9 Transport Wheels Carrying Handle Recoil Starter Grip BEFORE OPERATION ARE YOU READY TO OPERATE THE TILLER? BEFORE OPERATION 11 IS YOUR WORKING AREA READY? IS YOUR TILLER READY TO GO? Safety Inspection OPERATION SAFE OPERATING PRECAUTIONS Moving the Tiller Drag Bar Installation OPERATION 13 Starting The Engine Stopping the Engine 14 OPERATION TILLER OPERATION Operating Tips Page 16 SERVICING YOUR TILLER THE IMPORTANCE OF MAINTENANCE MAINTENANCE SAFETY Safety Precautions 17 MAINTENANCE SCHEDULE 18 ENGINE Engine Oil Level Check Engine Oil Change Engine Oil Recommendations Air Filter Check Air Filter Cleaning Spark Plug Service Spark Arrester Service Cooling Fin Inspection Throttle Cable Inspection Carburetor Adjustment Throttle Cable Adjustment 24 FUEL SYSTEM Refueling Fuel Recommendations Fuel Tube Inspection Fuel Filter and Fuel Tank Cleaning 26 TRANSMISSION LUBRICATION 27 ASSEMBLY THE IMPORTANCE OF PROPER ASSEMBLY IMPORTANT SAFETY PRECAUTIONS 28 ASSEMBLY UNPACKING ADDING OIL BEFORE OPERATION 29 STORAGE STORAGE PREPARATION Cleaning Fuel Adding Fuel Stabilizer To Extend Fuel Storage Life 30 STORAGE Draining the Fuel Tank and Carburetor Engine Oil Carburetor & Air Cleaner TRANSPORTING BEFORE LOADING LOADING TAKING CARE OF UNEXPECTED PROBLEMS Engine Will Not Start Tiller Tines (or Attachment) Wont Stop Turning When Throttle is at SLOW Position Low Power or Engine Speed Wont Increase 33 TECHNICAL & CONSUMER INFORMATION SERIAL NUMBER LOCATIONS CARBURETOR MODIFICATIONS FOR HIGH ALTITUDE OPERATION 34 OXYGENATED FUELS 35 EMISSIONS CONTROL SYSTEM INFORMATION Source of Emissions The U.S., California Clean Air Act and Environment Canada Tampering and Altering 36 Air Index SPECIFICATIONS 37 TUNEUP CONSUMER INFORMATION Find an Authorized Honda Servicing Dealer in Your Area www.hondapowerequipment.com/dealer Customer Service Information Honda Publications Replacement Parts, Optional Equipment, and Service Items Replacement Parts Service Items Optional Equipment Distributors Limited Warranty To Qualify for this Warranty: What American Honda will Repair or Replace Under Warranty: 40 Accessories, Replacement Parts, and Apparel Warranty To Qualify for this Warranty: What American Honda will Repair or Replace Under Warranty: Exclusions: 41 EMISSION CONTROL SYSTEM WARRANTY Your Warranty Rights And Obligations: California Other States, U.S. territories and Canada Warranty Coverage: To Obtain Warranty Service: Exclusions: Disclaimer of Consequential Damage and Limitation of Implied Warranties: Emission Control System Warranty Parts: INDEX A B C D 44 INDEX QUICK REFERENCE * Resistor plugs reduce the interference with radio and television reception.