SAFETY SWITCH
Before performing these inspections, remove the spark plug cap.
1. P.T.O. switch inspection
l With the shift lever in the N (Neutral) position, set the P.T.O. lever in
the ON (Engaged position).
l Check that the starter motor is not started when the engine switch is
turned to the START position.
l Return the P.T.O. lever to the OFF (Disengaged) position.
2. Neutral switch inspection
l With the P.T.O. lever in the OFF (Disengaged) position, move the
shift lever from the “N” (Neutral) position into a gear or speed range.
l Check that the starter motor is not started when the engine switch is
turned to the START position.
l Return the shift lever to the N (Neutral) position and reinstall the
spark plug cap.
SEAT ADJUSTMENT
1.
2.
3.
4.
Raise the rear body.
Loosen the seat adjusting knob.
Move the seat to a position that allows you to reach all controls easily
and comfortably.
Tighten the seat adjusting knob securely.
ADJUSTING
KNOB
32