Drive clutch inspection (H3011 only, Manual Transmission)
1. Place the shift lever in the “2” position.
2. Using light pressure, push the clutch arm toward the front of the riding
mower until you feel resistance. At this point the index mark on the
clutch arm should be between the two notches on the clutch cable
joint. If the index mark moves past the service limit notch, the clutch
disk may be worn out; consult your authorized Honda riding mower
dealer.
NOTE: Do not force the clutch arm during this inspection, or a false failure
indication will result.
CLUTCH INDEX MARK
SERVICE
‘- ^““\ 1 NOTCH
LIMIT
CLUTCH ARM
NOTCH CLUTCH
CABLE
JOINT
54