Parking brake lever and warning buzzer
This lever is used to set the brake when the lawn tractor is parked.
To set the parking brake, pull the lever fully up until the ratchet locks, and
be sure that the parking indicator lamp on the control panel is ON.
To release the parking brake, pull the lever up slightly and press the set
button, lower the lever while holding in the button.
The warning buzzer will sound if the seated operator moves the shift lever
out of the neutral position while the parking brake is set, and engine
switch is in the “ON” position. Releasing the parking brake lever will stop
the buzzer.
A delayed engine cutoff is interlinked with the parking brake warning
buzzer. This feature prevents the lawn tractor from being operated while
the parking brake is set.
The engine will stop a few seconds after the war-
ning buzzer begins to sound unless the parking brake is released.
IMPORTANT NOTICE
1 When washing the lawn tractor, do not spray water
directly into the warning buzzer.
PARKING BRAKE BUTTON PARKING INDICATOR LAMP
WARNING BUZZER
14