THROTTLE CONTROL CABLE ADJUSTMENT
1. With the throttle lever in the “CHOKE” position,
the carburetor control lever should be pulled all
the way to the right. Push the control lever with
your finger to check whether it is all the way to
the right.
2. If adjustment is necessary, loosen the lock nuts and
turn them to run the adjuster up or down as re-
quired. Tighten the lock nuts and recheck the car-
buretor control lever position.
3. Start the engine and make sure the engine stops
when the throttle lever is moved to the “STOP”
position. Readjust the cable if necessary.
ADJUSTER
NUTS
CHOKE
OTTLE LEVER
I-