Honda Power Equipment HRB216TXA owner manual Drive Clutch Cable Adjustment TXA gear transmission

SERVICING YOUR HONDA LAWN MOWER

Drive Clutch Cable Adjustment

TXA (gear transmission)

1.Measure free play at the top of the lever, as shown. Free play should be 1/16 ~ 3/16 in (1 ~ 5 mm). If adjustment is necessary:

2.Loosen the lock nuts with a 10 mm wrench, and move the adjuster up or down as required.

3.Tighten the lock nuts and recheck free play.

4.Start the engine outdoors, and operate the drive clutch lever. Check that the drive clutch engages and releases properly.

If the drive clutch does not operate as it should, with correct cable adjustment, take the mower to an authorized Honda servicing dealer for repair.

1/16 ~ 3/16 in

(1 ~ 5 mm)

LOCK

NUTS

ADJUSTER

DRIVE CLUTCH LEVER

42