SERVICING YOUR LAWN MOWER

THROTTLE CABLE INSPECTION

Throttle cable adjustment is necessary if the throttle lever does not
operate the choke properly.
You can inspect choke operation by observing the movement of the
choke arm, which is located on top of the carburetor.
1.
Move the throttle lever to the
FAST
position.
2.
Remove the air cleaner cover
(page

36).

3.
Use a feeler gauge and CONTROL CHOKE ARM
measure the clearance between
the control choke arm and the
control lever. The clearance
should be
0
-
0.040
in
(0
-
1
mm).
CONTROL LEVER
4. To adjust the clearance, loosen LOCK
the lock nuts with a 10 rnm NUTS
wrench. Move the adjuster up or
down as required to obtain the
proper clearance. Tighten the
lock nuts.
\
ADJUSTER
42