3. CONTROLS
ROTO-SKIP LEVER
The ROTO-STOP lever operates the blade brake/clutch mechanism. It is used
to start and stop the blade
lb put the blade into operation, press the button on top of the ROTO-STOP lever,
then push the lever forward and hold it against the handlebar.
Releasing the ROTO-STOP lever will stop the blade
Operate the ROTO-STOP lever with a quick and complete motion, so the blade
drive is always either fully engaged or stopped. This will help to prevent stalling
the
engine,
and it will also extend the service life of the ROTO-STOP mechanism.
IMPORTANT NOTICE If you move the ROTO-STOP lever slowly or
partially, the blade brake/clutch mechanism will wear out prematurely.
NOTE: Always release the ROTO-STOP lever before starting the engine If the
blade drive is engaged, extra effort will be required to operate the starter.
ROTO-STOP LEVER
/
/
11
I