MAINTENANCE & ADJUSTMENTS
Recommended Oil Use a high-detergent, premium quality 4-stroke engine oil certified to meet API
Service Classification SJ or equivalent.
- 20 0 20 40 60 80 100°F
- 20 - 10 0 10 20 30 40°C
AMBIENT TEMPERATURE
SAE 1 OW-30 is recommended for general, all-temperature use. Other viscosities
shown in the chart may be used when the average temperature in your area is
within the indicated range.
Changing the Engine Oil Change the oil at the recommended interval or more
frequently under extreme operating conditions.
Drain the oil while the engine is warm to assure rapid
and complete draining.
1. Install one end of a section of M”-hose over the
drain outlet and place the other end in a suitable
container to catch the used oil.
2. Clean the area around the oil filler cap and remove it.
3. Turn the drain valve counterclockwise about 4 turns to open it. Do not open the
valve more than 6 turns to avoid damaging the seals.
4. When the oil has drained, turn the valve clockwise to close it and remove the
section of hose. To avoid damaging the valve, do not over-tighten it.
5. Refill the engine with the correct amount of the recommended oil.
6. After running the engine, recheck the oil level and adjust if necessary.
pGTicq
Improper disposal of engine oil can be harmful to the environment. If you change
your own oil, please dispose of it properly. Put it in a sealed container, and take it
to a recycling center. Do not discard it in a trash bin or dump it on the ground.
30