7
Drive Clutch Lever
(SDA, TDA)
Push the drive clutch lever
forward and hold it against the
handlebar to propel the mower
forward.
Release the drive clutch lever to
stop the mower’s forward
movement.
Always release the drive clutch
lever before starting the engine.
If the drive clutch is engaged, the
mower will move forward when
you operate the starter.
Operate the drive clutch lever with a quick and complete motion, so
the drive clutch is either fully engaged or fully released. Hold the drive
clutch lever against the handlebar during self-propelled mowing. This
will help to extend the service life of the clutch mechanism.
Shift Lever
(TDA)
Use the shift lever to adjust
the forward speed of the
mower. Do not use the throttle
lever; the throttle lever must
be kept in the FAST position
for the best mowing
performance.
You may move the shift lever
anytime; however, if the
mower is pulling hard, release
the drive clutch lever between
shifts for smooth operation.
1st and 2nd gears are recommended for maximum mowing
performance. 3rd gear should be used to transport the mower.
STOPPING THE ENGINE 1. Release the drive clutch
lever (SDA, TDA).
2. Move the throttle lever
to the SLOW position.
3. Release the flywheel
brake lever to stop the
engine and blade
rotation.
4. When the mower is not in use, turn the fuel valve to OFF.
DRIVE CLUTCH LEVER (SDA, TDA
)
SPEED
3
2
1
1st
GEAR 2nd
GEAR
3rd
GEAR
DRIVE CLUTCH
LEVER (SDA, TDA)
SLOW
FLYWHEEL
BRAKE
LEVER
OFF
FUEL
VALVE