9
Remember that an authorized Honda servicing dealer knows your
mower best and is fully equipped to maintain and repair it.
To ensure the best quality and reliability, use only new, genuine
Honda parts or their equivalents for repair and replacement.
MAINTENANCE SCHEDULE 1. Service more frequently when used in dusty areas.
2. These items should be serviced by an authorized Honda servicing
dealer, unless you have the proper tools and are mechanically
proficient. Refer to the Honda shop manual for service procedures.
Failure to follow this maintenance schedule could result in
non-warrantable failures.
BLADE(S)Inspection
1. Turn the fuel valve OFF
(page 7). Disconnect the
spark plug cap from the
spark plug (page 12).
2. Tilt the mower to the right,
so the air cleaner side is
up. This will help to
prevent fuel leakage and
hard starting.
3. Inspect the blade(s) for
wear and damage.
A dull blade can be sharpened, but a blade that is excessively
worn, bent, cracked, or otherwise damaged must be replaced. A
worn or damaged blade can break, causing blade pieces to be
thrown from the mower.
If the blade(s) are bent, take the lawn mower to an authorized
Honda servicing dealer for inspection.
4. A torque wrench must always be used when installing the blade(s).
Check that the blade bolts are tight.
Removal and Installation
If you remove the blade(s) for sharpening or replacement, you will
need a torque wrench for installation. Wear heavy gloves to protect
your hands.
BLADE SHARPENING: To avoid weakening the blade(s) or causing
imbalance or poor cutting, the blade(s) should be sharpened by
trained staff at an authorized Honda servicing dealer.
BLADE REPLACEMENT: Use genuine Honda replacement blade(s)
or their equivalent (page 18).
Interval Item
Before each use
Inspect the blade(s) (page 9)
Check the blade torque (page 10)
Check the grass bag (HRR) (page 10)
Check the engine oil level (page 11)
Check the air cleaner (page 11)
First month or
5 hours Change the engine oil (page 11)
Every year or
25 hours Clean the air cleaner filter 1 (page 11)
Every 50 hours Change the engine oil 1 (page11)
Every 100 hours Inspect-adjust the spark plug (page 12)
Clean-check the spark arrester (page 12)
Adjust the throttle cable 2
Check operation of the flywheel brake (page 12)
Check the flywheel brake pad 2
Grease the pinion gears 2
Every 150 hours Replace the air cleaner filter 1 (page11)
Replace the spark plug (page 12)
Adjust the valve clearance 2
Adjust the idle speed 2
Clean the fuel tank and filter 2
After every 250
hours Clean the combustion chamber 2
Every 2 years Check the fuel line and replace if necessary 2
WARNING
A worn, cracked, or damaged blade can break, and pieces
of the damaged blade can become dangerous projectiles.
Thrown objects can cause serious injury.
Inspect the blade(s) regularly, and do not operate the
mower with worn or damaged blade(s).
BLADE(S)
BLADE BOLTS
NORMAL EXCESSIVELY
WORN BENT CRACKED