Symptom-to-FRU index

Symptom-to-FRU index

The symptom-to-FRU index in this section lists symptoms and errors and their possible causes. The most likely cause is listed first, in boldface type.

Note: Do the FRU replacement or other actions in the sequence shown in the column headed “FRU or action, in sequence.” If replacing a FRU does not solve the problem, put the original part back in the computer. Do not replace a nondefective FRU.

This index can also help you determine, during regular servicing, what FRUs are likely to need to be replaced next.

A numeric error is displayed for each error detected in POST or system operation. In the displays, n can be any number.

If no numeric code is displayed, check the narrative descriptions of symptoms. If the symptom is not described there, go to “Intermittent problems” on page 72.

Note

For a device not supported by diagnostic codes in the ThinkPad notebook computers, see the manual for that device.

Numeric error codes

Symptom or error

FRU or action, in sequence

 

 

0175

System board

Bad CRC1, stop POST

Replace planar.(System halt)

task—EEPROM CRC1 is not

 

correct (block #6)

 

 

 

0176

1. Run BIOS Setup Utility,

System Security—The system

and then save current

has been tampered with.

setting by pressing F10.

 

2. System board.

 

 

0177

System board

Bad SVP data, stop POST

 

task—Checksum of the

 

supervisor password in the

 

EEPROM is not correct.

 

 

 

(continued)

ThinkPad X40 series 61

Page 65
Image 65
Lenovo MT 2369 manual Symptom-to-FRU index, Numeric error codes