Related service information
6.When the Product Recovery program finishes running, the computer will restart with the
Using the recovery CD
To create the service partition and install the preloaded system from the recovery CD, do the following:
To create the service partition:
1.Erase all partitions on the hard disk drive, using FDISK or a similar application.
2.Boot with the recovery CD (and the boot diskette if required.)
3.Following message is displayed: “Your computer originally included a Product Recovery program ...
Reinstall the Product Recovery program? (Y/N) [ ]”.
Note: If the hard disk drive contains any partitions, you do not receive this message; go to step 1.
4.Press Y key. The service partition is created and loaded with the Product Recovery program files.
Note: If you do not want to create the service partition, press N key, and then go to step 8.
5.At next window, press Enter to continue.
v The service partition is created. The system automatically reboots during this process.
vThe recovery process copies some files to the service partition, and PKUNZIPs others.
vFollow the prompts. You may be prompted to change CDs.
vWhen the process is complete, the system reboots. Continue to step 6 to install preloaded system.
Install preloaded system from CD:
6.Boot with the recovery CD (and the boot diskette if required.)
7.If the hard disk drive is blank, the following message is displayed: “Your computer originally included a
Product Recovery program ... Reinstall the Product Recovery program? (Y/N) [ ]”.
v To install the service partition, go to step 4.
vTo preload the hard disk drive without installing the service partition, press N key.
8.If you get a message asking which operating system to install, select the proper operating system and press Enter.
9.A message is displayed: “Full Recovery:”. Press Enter to select.
General descriptions 33
