Honda Power Equipment HS1132, HS724, HS928 - page 26

24
OPERATION
PUSH
STARTERGRIP
ENGINESWITCH
ON
DDiirreeccttiioonnttooppuullll
Manual Startingonly
Do not pull the starter gripwhile the engine is running. The starter
could be damaged.
Do not allow the starter gripto snap back against the engine. Return
it gently to prevent damage to the starter.
Return the starter grip gently to
the engine.
Turn the engine switch to the
ON position.
Push the starter button until the
engine starts. After the engine
starts, disconnect the power
cord from the electricaloutlet,
and then from the switch box.
Do not operate the starter for more than1 minute. If the engine
fails to start, release the button and allow the starter to cool for 15
minutes before operating it again.
Pull the starter griplightly until
you feel resistance, then pull
briskly in the direction of the
arrow as shown.
Turn the engine switch to the
ON position.
b.
c.
b.
a.
c.
07/05/29 16:40:17 31767721_025