FAILURE TO OBSERVE THESE WARNINGS AND /OR TAMPERING WITH
THE PUMP RELIEVES THE MANUFACTURER OF ANY RESPONSIBILITY IN
THE EVENT OF DAMAGE TO PERSONS OR OBJECTS AND/OR TO THE
PUMP.
Before starting the pump it is important for the user to know how to per-
form all the operations described in this manual and to apply them at all
times during use or maintenance of the pump.
5.1. PREVENTIVE MEASURES TO BE TAKEN BY THE USER
A !
The user must comply with all the accident-prevention regulations
in force in the country in which the pump is being used; the indica-
tions given in chapters 7.1 and 7.2 must be scrupulously followed.
During pump repairs or maintenance, remove the plug from the
socket and/or turn off the switch (if provided), thus interrupting the
supply of electric power to the pump. This will prevent accidental
starting which could cause damage to persons and/or objects.
All maintenance operations, installations or shifting of the pump
with the electric system live may cause severe or fatal injury.
During operation, avoid moving or shifting the pump.
Before using the pump, always check that the cable and all the
electric devices are in working condition
Never start the pump (by inserting the plug in the socket and/or
switching on the switch) with bare feet, with your feet in the water,
or with wet hands.
The user must not carry out under his own initiative any operations
or jobs not recommended in this manual.
5.2 GENERAL SAFETY WARNINGS
A ! WSP50 AND WSPlOO pumps are designed in such a way that all
the moving parts are protected by the use of casings. The manu-
A
facturer declines all responsibility in the event of damage caused
f as a result of tampering with these devices.
Each lead or live part is electrically insulated to ground: there is also a further
safety device in that the accessible conductive parts are connected to a
ground lead so that the parts within reach do not become electrically charged
in the event of failure of the principal insulation.