9.1. UNPACKING
Check that there are no breaks or severe dents in the packing; if there are,
point this out immediately to the person who delivers the material. After
removing the pump from the package, check that it has not suffered any dam-
age during transport; if damage is found, inform the dealer within 8 days of
delivery. Then check that the characteristics stated on the plate of the pump
are the same as you requested in your order.
9.2. HANDLING AND DISCONNECTING
IFAILURE ~0 FOLLOW THESE INSTRUCTIONS MAY CAUSE
A ! THE PUMP TO FAIL, SUFFERING SEVERE DAMAGE.
DO NOT USE THE POWER CABLE TO LIFT OR DRAG
n 4 THE PUMP.
To handle or disconnect the pump you must:
-remove the plug from the power socket and/or turn off the switch,
if provided;
-roll up and hold the electric power cable in your hand;
- lift the pump and the delivery pipe with the handle provided or with a
cable fixed to the handle.
If the pump is set for fixed applications, perform the following operations
before handling it:
-remove the plug from the power socket and/or turn off the switch,
if provided;
-unscrew any clamps and remove the delivery pipe;
-roll up and hold the electric power cable in your hand;
-lift the pump with the handle provided or with a cable fixed to the handle.
9.3 TRANSPORT
The pump is packed in a cardboard box for transport; as its total weight and
bulk are not excessive (fig. I), transport presents no problems.