Connecting Vehicle Power

Complete vehicle cradle mounting and power instruction is contained in the VX6 Vehicle Mounting Reference Guide.

Vehicle 12-80VDC Power Connection Cable

Caution For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This fused circuit requires a ten Amp maximum time delay (slow blow) high interrupting rating fuse. If the supply con-

nection is made directly to the battery, the fuse should be installed in the positive lead within 5 inches of the battery positive (+) terminal. Note: For North America, a UL Listed fuse is to be used.

Caution

For installation by trained service personnel only.

Warning

Risk of ignition or explosion. Explosive gas mixture may be vented from battery. Work only in well ventilated area. Avoid creating arcs and sparks at battery terminals.

Note: Please see Power Adapter Cable for information on adapting a VX1, VX2 or VX4 DC power supply to the VX6.

1.To Vehicle Battery

2.To Vehicle Mounted Device or UPS Battery Pack

3.White (DC+)

4.Black (DC-)

5.Green (GND)

6.12 – 80VDC

3-4