Chapter 2: Set Up A New VX6

This page lists a quick outline of the steps you might take when setting up a new VX6. More instruction for each step is listed later in this guide. Please refer to the VX6 Reference Guide for additional information and instruction.

Contact Technical Assistance if you need additional help.

Note: Installing or removing accessories should be performed on a clean, well-lit surface. When necessary, protect the work surface, the VX6, and components from electrostatic discharge.

Hardware Setup

1.Connect accessories.

2.Connect cables.

3.Connect power cable.

4.Secure all cables to the VX6 with the Strain Relief Cable Clamps.

5.Press the Power key.

Software Setup

Prerequisite: Hardware setup is complete.

1.Calibrate Touch screen

2.Adjust Speaker Volume

3.Pair Bluetooth devices

4.Setup Wireless client parameters

5.Setup terminal emulation parameters

6.Save changed settings to the registry

7.Setup the AppLock parameters

8.Set the Scanner Wedge parameters

Please refer to the VX6 Reference Guide for additional information and instruction.

End User License Agreement (EULA)

When a new VX6 starts up a EULA is displayed on the touch screen. It remains on the screen until the Accept or Decline button is tapped with a stylus.

Tap the Accept button to accept the EULA terms and the VX6 continues the startup process. The EULA is not presented to the user again.

Tap the Decline button to decline the EULA and the VX6 will reboot. It will continue to reboot until the Accept button is tapped with the stylus.

Note: The EULA will be presented after any operating system upgrade or re-installation, including language-specific operating systems.

2-1