![](/images/backgrounds/161161/161161-24650x1.png)
and CTS is not asserted, the device transmit buffer is cleared and scanning may resume.
Default = RTS/CTS Off.
Flow Control, No TimeoutWhen using Flow Control with Timeout, you must program the length of the delay you want to wait for CTS from the host. Set the length (in millisec- onds) for a timeout by scanning the bar code below, then setting the timeout (from
Standard ASCII control characters can be used to tell the scanner to start sending data (XON/XOFF On) or to stop sending data (XON/XOFF Off). When the host sends the XOFF character (DC3, hex 13) to the scanner,
2 - 28