4500 Thermostat Installation Instructions
5-4
“For set-back on/off, enter 3.” Turning off set-back will result in it
remaining disabled while armed away, until the next time the system is
disarmed.
This feature allows the user to turn off the set-back before returning home, so
that the premises will have time to return to a comfortable at-home
temperature. It also allows the user to turn off set-back before leaving home,
when they plan to be away only a short time. The user can also turn the set-
back on again with this menu selection if they have a change of plans.
“To log on, enter 2.” (This selection is announced if more than one
thermostat has been programmed into the system). It allows the user to select
thermostat #1 or #2 for setting. The user can set the 4500 just selected with
the “to change temperature, enter 1” menu selection.
“To exit, enter 0.” (This selection exits the thermostat mode).
If a 4500 thermostat does not respond to the 4286 phone module for two
minutes, the phone module will announce,
“Check thermostat (1/2).(Descriptor),” instead of the temperature.
If the temperature falls below 37° F (3° C), the 4286 phone module will
announce, “Check thermostat (1/2). (Descriptor),” instead of the
temperature.