Configuration
Document 800-05056 Rev C 41
11/09
Figure 3-23 Screen Setup — Remote Sites
Add Click Add and enter the information about the remote site you want to add.
Figure 3-24 Add Site Screen
Reference Group: The site should be assigned to a Reference Group for
effective management of multiple remote sites. Click Add to create a new
reference group.
Remote Site Setup: Enter a site name and the IP address of the remote site
(modem telephone number for dial-up connections), acquired from your network
administrator. Click Port to set up the IP port number of each program. The IP
port number should match the value set during the network setup of the remote
DVR. If the remote system version does not allow you to set the IP port numbers,