Operation
76
Note With some computers, the image drawing speed might decrease
while using a deinterlace filter, depending on the type of
deinterlace filter.
Table 4-1 Camera Popup Menu Options
Option Function
Change Camera
Title
Changes the camera name that displays on the screen. If
you leave the Camera Title blank, then the camera name
remote setup appears. Changing the camera title does
not affect the camera name that was set up on the remote
site.
Enable Audio Enables audio communication with the remote site on the
Watch screen (Two-way audio equipped remote sites
only). Plays audio while playing back, on the Search
screen, recorded video that has recorded audio. See Live
Monitoring on page 59 and Playback and Search on page
64 for more information.
Aspect Ratio Changes the image aspect ratio that is displayed on each
camera screen.
Fit to Screen Displays the images by fitting them to the
screen size.
Original Ratio Displays the images by fitting them within
the screen size while maintaining their original ratio.
Half Size (x0.5) to Quadruple Size (x4) Select the
desired image size. Options are enabled when the
selected camera screen can displays images in that size.
Set Record Camera Sets the selected camera channel to be recorded during
panic recording. See System Menu on page 35 for
information on configuring camera channels for panic
recording.
Deinterlacing Enhances image display quality of interlaced video on the
screen by eliminating horizontal scan lines or noise in
areas with motion.
Anti-Aliasing Screen Enhances image display quality for all cameras on the
screen by eliminating stair-stepping (aliasing) effects in
the enlarged image.
Disconnect Camera Disconnects a camera on the screen.