Operation
Document 800-05056 Rev C 61
11/09
Figure 4-3 Audio Communication Menu
To send audio to the selected remote site, click and speak into the microphone.
To monitor live audio from the selected remote site through the attached speaker, click
.
Click both and for two-way communication.
Click to disable audio communication.

Selecting an Audio Channel

Only DVRs that support remote two-way audio allow you to select an audio channel to
monitor from the RASplus system.
Click to display the Select Audio Channel dialog box.
Figure 4-4 Select Audio Channel Dialog Box
Select an audio channel to monitor, then click OK.
Note To verify if two-way audio is supported, check the user guide for
your DVR.
Sequence Monitoring
Click on the toolbar to sequentially connect to the registered sites. This allows for
connection to more than one remote site and for the display of images from selected
cameras.
Click during sequence monitoring to release sequence monitoring and to maintain
the current connection.