Honeywell 700, 800 Fig. 21. Flow Chart 4: Auto Setup Page 3.

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD

27 66-2069—02

Fig. 21. Flow Chart 4: Auto Setup Page 3.

IS THE AUTO SETUP

RATIO UNACCEPTABLE?

RATIO > 80%

DISPLAY ALTERNATES

SHOWING ‘UA’ AND RATIO

IS THE AUTO SETUP

RATIO MARGINAL?

71% < RATIO < 81%

RATIO IS UNACCEPTABLE

RATIO MAY BE ACCEPTABLE

DISPLAY ALTERNATES SHOWING ‘AC’

AND THE NEW RATIO SETTING

NORMAL OPERATION

M34460

AUTO SETUP - PAGE 3

(CONTINUED)

NOTE:

PRESS RESET AT ANY TIME

DURING THIS PROCEDURE

TO CANCEL AUTO SETUP

RESET

PRESS RESET TO CANCEL AUTO SETUP

RESET

DISPLAY SHOWS ‘__’ FOR ONE SECOND

AND NEW VALUES ARE SAVED

PRESS ACCEPT RATIO / SET GAIN TO

ACCEPT THE RATIO DISPLAYED

RATIO

SET GAIN

Contents

Main USER MANUAL 66-2069-02 Honeywell Model 700/800 Signal Processor and Viewing Head APPLICATION FEATURES SPECIFICATIONS Series 700 and 800 Viewing Heads Model 700ACSP & Model 700DCSP Signal Processer APPROVALS INSTALLATION WARNING Signal Processor Power Connections Fig. 1. Model 700ACSP Signal Processor Wiring. FOR INDICATOR OR - - + + Fig. 2. Model 700DCSP Signal Processor Wiring. - - +26VDC GND .4A1A 1A Viewing Head Connector and Wiring Cable Preparation Protecting the Viewing Head Cable (Connector Series) Viewing Head Connector LED Indicators Viewing Head Mounting and Sighting Viewing Head Mounting Block Pressure ACCESSORIES OPERATION IR Detector Filter Selection for IR Viewing Head UV Detector Self-Checking Adjustment of VH Sighting and Gain Orificing Signal Processor User Interface Front Panel LED Indicators and Display Manual Setup of Setpoints Setting the Viewing Head Gain Relay On Setpoint Ratio (%) Relay Off/Relay On Setpoint Setting FFRT (Flame Failure Response Time) Automatic Setup of Setpoints Panel Lock MODBUS COMMUNICATION Communication Setting Modbus RTU Function Supported Fig. 8. COMMOD Communication Converter Wiring. TROUBLESHOOTING Lockout or Faulty VH Indication Parameter Match Error Panel Lock with No VH Connected Grounding and Shielding Fig. 9. Models S702 and S706 Viewing Heads. Fig. 10. Models S802 and S806 Viewing Heads. 21/64 (8) HEX 1-1/2 (38) ACROSS FLATS 1/4 (6) 18 NPT FOR PURGE AIR 1-49/64 (45) DIA MOUNTING BLOCK Fig. 11. Model 700DCSP Signal Processor. Fig. 12. Model 700ACSP Signal Processor. MODEL 700AC Mounting Examples Page Fig. 17. Opposed Fired Viewing Head Sighting Fig. 18. Flow Chart 1 - Setting Factory Defaults. RESTORING DEFAULT VALUES Fig. 19. Flow Chart 2 - Auto Setup Page 1. Fig. 20. Flow Chart 3 - Auto Setup Page 2. AUTO SETUP - PAGE 2 (CONTINUED) NOTE: Fig. 21. Flow Chart 4: Auto Setup Page 3. AUTO SETUP - PAGE 3 (CONTINUED) NOTE: Fig. 22. Flow Chart 5: Manual Flame On Setup. SETTING RELAY ON VALUE Fig. 23. Flow Chart 6: Manual Flame Off Setup. SETTING RATIO PERCENTAGE Fig. 24. Flow Chart 7: Flame Failure Response Time (FFRT) Setup. SETTING FLAME FAILURE RESPONSE TIME (FFRT) Fig. 25. Flow Chart 8: 0-20/4-20mA Analog Output Setup. SETTING ANALOG OUTPUT LEVELS (0-20/4-20 mA) Fig. 26. Flow Chart 9: Viewing Head Gain Setting. SETTING VIEWING HEAD GAIN SAFETY MANUAL: 700 SIGNAL PROCESSOR 700ACSP, 700DCSP Product Declaration Safety Function of the 700 700AC or 700DC Signal Processor Proof Test Interval 700AC or 700DC Signal Processor Proof Test Procedure Equipment Setup Tests Product Decommissioning SAFETY MANUAL: S70X & 80X VIEWING HEAD S702, S706, S802, AND S806 Safety Function of the S702, S706, S802, and S806 S70X and S80X Viewing Head Proof Test Interval S70X and S80X Viewing Head Proof Test Procedure Equipment Setup Product Decommissioning Page Automation and Control Solutions