Honeywell 700, 800 , Fig. 22. Flow Chart 5: Manual Flame On Setup.

HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD

66-2069—02 28

Fig. 22. Flow Chart 5: Manual Flame On Setup.

IS THE PANEL LOCKED?

RELAY ON

SET

POINT

PRESS RELAY ON SET POINT

FOR 2 SECONDS

2 SECS

IS THE AUTO SET

LIGHT LIT?

DISPLAY SHOWS CURRENT

RELAY SETTING

DISPLAY SHOWS ‘CF’,

MEANING CONFIRM

DISPLAY SHOWS ‘PL’

UNTIL KEY RELEASED

NORMAL OPERATION

SETTING RELAY ON VALUE

M34461

PRESS RESET OR WAIT 4 SECONDS TO

CANCEL CHANGING THE AUTO SETTING

RESET

USE INCREASE OR DECREASE KEYS

TO ADJUST SETTING

INCREASE

DECREASE

USE INCREASE OR DECREASE KEYS

TO ADJUST SETTING

INCREASE

DECREASE PRESS RESET OR WAIT 4 SECONDS

TO RESTORE OLD SETTING

PRESS STORE TO SAVE

THE NEW SETTING

STORE

RESET

PRESS RELAY ON SET POINT AGAIN TO CONFIRM

YOU WANT TO CHANGE THE AUTO SETTING

RELAY ON

SET

POINT

Contents

Main USER MANUAL 66-2069-02 Honeywell Model 700/800 Signal Processor and Viewing Head APPLICATION FEATURES SPECIFICATIONS Series 700 and 800 Viewing Heads Model 700ACSP & Model 700DCSP Signal Processer APPROVALS INSTALLATION WARNING Signal Processor Power Connections Fig. 1. Model 700ACSP Signal Processor Wiring. FOR INDICATOR OR - - + + Fig. 2. Model 700DCSP Signal Processor Wiring. - - +26VDC GND .4A1A 1A Viewing Head Connector and Wiring Cable Preparation Protecting the Viewing Head Cable (Connector Series) Viewing Head Connector LED Indicators Viewing Head Mounting and Sighting Viewing Head Mounting Block Pressure ACCESSORIES OPERATION IR Detector Filter Selection for IR Viewing Head UV Detector Self-Checking Adjustment of VH Sighting and Gain Orificing Signal Processor User Interface Front Panel LED Indicators and Display Manual Setup of Setpoints Setting the Viewing Head Gain Relay On Setpoint Ratio (%) Relay Off/Relay On Setpoint Setting FFRT (Flame Failure Response Time) Automatic Setup of Setpoints Panel Lock MODBUS COMMUNICATION Communication Setting Modbus RTU Function Supported Fig. 8. COMMOD Communication Converter Wiring. TROUBLESHOOTING Lockout or Faulty VH Indication Parameter Match Error Panel Lock with No VH Connected Grounding and Shielding Fig. 9. Models S702 and S706 Viewing Heads. Fig. 10. Models S802 and S806 Viewing Heads. 21/64 (8) HEX 1-1/2 (38) ACROSS FLATS 1/4 (6) 18 NPT FOR PURGE AIR 1-49/64 (45) DIA MOUNTING BLOCK Fig. 11. Model 700DCSP Signal Processor. Fig. 12. Model 700ACSP Signal Processor. MODEL 700AC Mounting Examples Page Fig. 17. Opposed Fired Viewing Head Sighting Fig. 18. Flow Chart 1 - Setting Factory Defaults. RESTORING DEFAULT VALUES Fig. 19. Flow Chart 2 - Auto Setup Page 1. Fig. 20. Flow Chart 3 - Auto Setup Page 2. AUTO SETUP - PAGE 2 (CONTINUED) NOTE: Fig. 21. Flow Chart 4: Auto Setup Page 3. AUTO SETUP - PAGE 3 (CONTINUED) NOTE: Fig. 22. Flow Chart 5: Manual Flame On Setup. SETTING RELAY ON VALUE Fig. 23. Flow Chart 6: Manual Flame Off Setup. SETTING RATIO PERCENTAGE Fig. 24. Flow Chart 7: Flame Failure Response Time (FFRT) Setup. SETTING FLAME FAILURE RESPONSE TIME (FFRT) Fig. 25. Flow Chart 8: 0-20/4-20mA Analog Output Setup. SETTING ANALOG OUTPUT LEVELS (0-20/4-20 mA) Fig. 26. Flow Chart 9: Viewing Head Gain Setting. SETTING VIEWING HEAD GAIN SAFETY MANUAL: 700 SIGNAL PROCESSOR 700ACSP, 700DCSP Product Declaration Safety Function of the 700 700AC or 700DC Signal Processor Proof Test Interval 700AC or 700DC Signal Processor Proof Test Procedure Equipment Setup Tests Product Decommissioning SAFETY MANUAL: S70X & 80X VIEWING HEAD S702, S706, S802, AND S806 Safety Function of the S702, S706, S802, and S806 S70X and S80X Viewing Head Proof Test Interval S70X and S80X Viewing Head Proof Test Procedure Equipment Setup Product Decommissioning Page Automation and Control Solutions