Honeywell CM67 Installer Set-Up, In Installer set up we can, Specific Applications, Setting

CM67 CHRONOTHERM

INSTALLER SET-UP

To enter the installer set-up mode :

a)Set the program slider to OFF.

b)Press and hold Info i button and press PROG 3,4 together.

c)The unit will display the first parameter of the installer parameter group category 1 (from n.1 to n.5).

d)Press TEMP or to change factory setting. The display will flash indicating that a change has been made.

e)Press INFO i button to confirm the change. The display will stop flashing.

f)Press + or - to go to next parameter.

g)Press PROG 2 button to go to Installer parameter group category 2 (from parameter n.6 to parameter n.16).

h)To exit installer mode move the slider in MAN or AUTO position.

In Installer set up we can :

❑Set-up specific applications

❑Enable special features

❑Establish support for Optional Accessories

Installer Set-up Number

(Press + or - to change) e.g. 1 = Optimisation

Installer Set-Up Mode

Selected

Abbreviated Set-Up Description

e.g. OP = Optimisation

1

Factory Setting or New Choice

Press TEMP ▲ or ▼to change e.g. O = Optimisation disabled 1 = Optimisation enabled

Specific Applications		Setting		What do you need to change ?
		Cycle/	Minimum	Note :
		Hour	ON time	a. To change Cycle/Hour, please go to parameter n. 9 in the
			(in minutes)		installer set-up mode.
				b. To change Minimum ON Time, please go to parameter n. 2 in
					the installer set-up mode.
Heating	Gas Boilers	6	1	No action required
	(<30KW)
	Oil Boiler	3	4	1.	Set Minimum ON Time to 4 minutes.
				2.	Set Cycle/Hour to 3.
	Thermal	12	1	Set Cycle/Hour to 12.
	Actuator
	Zone valve	6	1	No action required.
	Electric heating	12	1	1.	Configure the Chronotherm for electric heating (set parameter
	(for applications				n.7 in the installer set up mode to 1).
	<8A)			2.	Set Cycle/Hour to 12.
Air				1.	For cooling application only, set the Chronotherm to cooling
conditioning					(set parameter n.6 in the installer set-up mode to 0)
				2.	For heat/ cool application, set the Chronotherm accordingly to
					required mode of operation
					winter = heating
					summer = cooling
				by changing parameter n.6 in the installer set-up mode. Explain to
				the end-user how to implement the change-over.
	Heat Pump/	3	4	1.	Set Minimum ON Time to 4 minutes .
	Air conditioner			2.	Set Cycle/Hour to 3.

3 EN0R 8498 R2 11/98