69-1199—4 16
The setpoint temperature range is 40°F to 90°F (5°C to 2°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling.
qPress to switch between heating and cooling setpoints.
NOTE: Program times are the same for heating and cooling.
qPress or until the display shows the desired temperature setpoint.
qPress , or and repeat these steps for each time period. Your weekday is now programmed.
Program Saturday and Sunday
Repeat each step in Program Weekdays for Saturday and Sunday.
qPress when the entire week is programmed.
Clear a Program Period
NOTE: Wake cannot be cleared.
qPress , , or for the program period you want to clear.
qPress until the desired day displays (Mon-Fri Sat; Sun).
qPress and hold the , , or for approximately 3 seconds until the time and temperature clear.
qRepeat the above steps for each period to be cleared.
qPress .
Heat/Cool
Settings
Leave
Return
Sleep
Run
Program
Leave
Return
Sleep
Day
Leave
Return
Sleep
Run
Program