17 69-1199—4
STEP 11. OPERATING YOUR THERMOSTAT

Change Temperature Setting Until the Next Program Period (Temporary Change)

qPress or until the screen shows the desired temperature setting.
NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is
displayed. Temporary appears in the display. The setting cancels when the next program period starts or
when you press .

Change Temperature Setting Indefinitely (Hold)

qMove the System switch to the desired position (Heat or Cool).
qPress then or to change your setting if desired. (The display changes from showing the setpoint
temperature to room temperature after approximately three seconds).
qTo cancel “Hold” press .

Change the Temperature Setting Until a Designated Day and Period (Vacation Hold)

qPress twice.
qPress or until the display shows the desired temperature setpoint.
qPress Time until the desired number of days that you will be away (1 through 255) is displayed.
qPress , , or to select the program period when you want the program to restart.
NOTE: If the Vacation Hold needs to be cancelled before the designated time, press to return to the
program.
Run
Program
Hold Temp
Run
Program
Hold Temp
Wake Leave
Return
Sleep
Run
Program