PROLONGING THE LIFE OF THE FILTER AND
MAINTAINING A CLEAN HUMIDIFIER
NOTE: DO NOT ATTEMPT TO CLEAN THE NATURAL COOL MOISTURE™ FILTER WITH ANY CHEMICAL SOLUTIONS, DOING SO WILL DAMAGE THE FILTER.
•HealthShield™ prevents the surface growth and migration of mold, fungus, algae, and bacteria. It is normal for a filter to discolor from mineral
•DO NOT clean the filter using any chemical solution.
•If a Natural Cool Moisture™ filter appears to be clogged by hard water or mineral deposits, soak it in a sink full of cool water for 10 minutes. DO NOT SQUEEZE OR WRING OUT THE NATURAL COOL MOISTURE™ FILTER. Always place filter back in the humidifier wet.
•To prevent mineral deposits use DuraFree™ Humidifier Water Softener, part no. AC817, each time the Water Tank is refilled.
•Always purchase Honeywell or Duracraft Brand Natural Cool Moisture™ filters as the fan motor of this humidifier and the Natural Cool Moisture™ filter are designed to function efficiently as a set. Using any other filter could damage the motor or reduce the humidifier’s performance.
•Be sure to empty water from the Water Tank and Base when not in use.
END-OF-THE-SEASON AND STORAGE
•Follow weekly CLEANING instructions when the humidifier will not be used for at least one week or more, or at the end of the season.
•At the end of the season, remove and throw away the filter; do not store with a used filter.
•Dry the humidifier completely before storing. DO NOT store with water inside the Base or Water Tank.
•Pack the unit in its original carton and store in a cool, dry location.
•Before next use, remember to install a new filter and clean the humidifier.
