Honeywell HCM-890 owner manual Filling Continued, Operation

FILLING CONTINUED

NOTE: WHEN CARRYING THE FILLED WATER TANK, PLEASE USE THE HANDLE AND PLACE YOUR OTHER HAND UNDER THE TANK FOR ADDITIONAL SUPPORT.

•Place the Motor Housing back onto Rinse-to-Clean™ Base.

•Once the filled tank has been positioned, do not attempt to move the humidifier. If it has to be moved, unplug the humidifier and remove the water tank first.

NOTE: DO NOT POUR WATER INTO THE GRILL ON THE TOP OF THE MOTOR HOUSING. DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE PERSONAL INJURY.

OPERATION

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN ELECTRIC SHOCK COULD OCCUR.

P O W E R

•With the power switch in the OFF position, plug the filled humidifier into a polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.

Fig. 4

H U M I D I T Y C O N T R O L

1.Set the fan speed control to the desired position (Fig. 4).

HIGH: For fast humidifying	ff	High
	O
LOW: For quieter operation

NOTE: The length of time your humidifier runs will vary depending on the quality of construction

and insulation of your room and house, as well as the fan speed.

Low

2.Turn the humidifier OFF if the humidity level feels too moist or you notice condensation forming on the walls and/or windows.

ALWAYS be sure to empty any unused water in the Rinse-to-Clean™ Base and/or Water Tank each time you refill the water tank or finish using the humidifier.