Honeywell HD61 operation manual Au T I O N

Design and specifications are	P/N:3810-0148B Rev 0 07/04
subject to change without notice.

										HD61 Series
	S			e t o i n s t			A			Operation Manual
			l		a	l
			p
		i	m			l
						3
						-
.								x
y								i		Color Dome Camera
e								b
s								s
a
t								r
e								a
								c
n
	m					e	k
		t
						t
			s		m
			u
				j d a s e ka
			Need Help?
Call 1.800.796.CCTV for sales, service and customer support.
www.honeywellvideo.com									READ AND KEEP THIS
										www.honeywellvideo.com
									OPERATION MANUAL

Menu [SHUTTER] - SHUTTER AUTO

1)SHUTTER setup (for LENS MANUAL)

①Press LEFT or RIGHT button in SHUTTER to select the mode to

AUTO ↙ ◀ ▶ FLK ◀ ▶ FIXED ↙

	◀ ▶MANUAL ↙.	SHUTTER AUTO
!	Setting Mode : AUTO ↙
		BRIGHTNESS	056

↙ : RETURN

COLOR DOME CAMERA 16

Menu [SHUTTER] - FIXED Mode Setup

1) FIXED ↙ setup

①	Press MENU button in FIXED ↙	SHUTTER FIXED
	to display the screen on the right side.
②	Press LEFT or RIGHT button in SHUTTER.	SHUTTER M : 1/60
	Can be set in ([NTSC: 1/60 ~ 1/100,000]
	[PAL: 1/50 ~ 1/100,000]) range.	↙ : RETURN

CAMERADOME 17COLOR

Menu [FUNCTION] - MOTION AREA 2

1)MOTION OSD description

①ALL CLEAR - Release all set AREA

②ALL SET - Set all 64 MOTION AREA.

③RETURN - Return to MOTION AREA Setup Mode.

④EXIT - Save AREA and return to MOTION SETUP MODE.

COLOR DOME CAMERA 32

Main Menu - ADJUST

1)ADJUST setup

①Press MENU button in ADJUST.

②Move to screen on the right side.

	!	Each LEVEL value can be	ADJUST
			CONTRAST	083
		adjusted using LEFT, RIGHT button.
			SHARPNESS	12
2)	CONTRAST setup
			CB_GAIN	190
	①	Adjust Y-gain value (0~255)
			CB_GAIN	205
3)	SHARPNESS setup		RETURN
	①	Adjust aperture value (0~31)			CAMERA
	①	Adjust COLOR CB_GAIN value (0~255)
4)	CB_GAIN setup
5)	CR_GAIN setup				DOME
	①	Adjust COLOR CR_GAIN value (0~255)			33COLOR

3-Axis . User Information

C AU T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Explanation of two Symbols

	The lightning flash with arrowhead symbol, within an equilateral
	triangle, is intended to alert the user to the presence of un-insulated
	"dangerous voltage" within the product's enclosure that may be of
	sufficient magnitude to constitute a risk of electric shock to persons.
	The exclamation point within an equilateral triangle is intended to
CAMERA	alert the user to the presence of important operating and maintenance-
	(servicing) instructions in the literature accompanying the appliance.
DOME	THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON THE BOTTOM OF THE SYSTEM.
	"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE"
COLOR
	2

3-Axis . Contents

Thank you for purchasing this COLOR VIDEO CAMERA.

Before using this camera, please read this operation manual carefully to obtain the best result and keep this manual for future reference.

	1. SAFETY INSTRUCTIONS	5	6. CONNECTIONS	10
	2. PRECAUTIONS	6	7. NAME AND FUNCTIONS	11
	3. FEATURES	7	8. OPERATING CAMERA	12
CAMERA	4. COMPOSITION	8	9. SPECIFICATIONS	36
	5. INSTALLATION	9	10. TROUBLESHOOTING	38
COLOR DOME
	4

3-Axis		2. PRECAUTIONS
		Handling
		Do not disassemble the camera and never touch	Be sure the ambient temperature is less than
		parts inside the camera.	40℃ in installation intended for long term
		Do not drop the camera or subject it to shocks	continuous operation.
		and vibrations to avoid possible damage.	Avoid installing in a humid or dusty place.
		When attaching or removing the lens, handle	Avoid installing in places where there are
		with care in order to that moisture and dust do
			strong magnetic fields and electric signals.
		not enter the camera.
			Avoid installing in places where the camera
		Installation and storage	would be subject to strong vibrations.
CAMERA
		Do not point the camera at the sun. This could	Never expose the camera to rain and water.
DOME		damage the camera whether it is operating or not.
		Do not install the camera where the temperature
COLOR	6
		could exceed the allowable range.

3-Axis 4. COMPOSITION

Guide Pattern

Operation Manual

Mounting Screw

CAMERA	Service Monitor Cable
COLOR DOME
	8

3-Axis 6. CONNECTION

#1	Video	Video Output
	(Yellow)
		GND
#2	Power- 12VDC
	(Red)

		• The wire is polarized.			• Use 12V DC	power source.
CAMERA		No.	Function	Terminal Color	R e m a r k
		#1	Video Output	Yellow	1.0 Vp-p
COLOR DOME		#2	Power Input	Red	12VDC (10V~15V), 360mA (Max)
	10

3-Axis		8. OPERATING CAMERA
			S E T U P M E N U
	CAMERA ID	• ON		• OFF
	SHUTTER	• AUTO	• FLK	• FIXED	• MANUAL
	WHITE BAL.	• ATW	• AWB	• FIXED	• MANUAL
	FUNCTION	• BLC	• AGC	• DAY NIGHT	• PRIVACY
		• MIRROR		• GAMMA	• MOTION
	ADJUST	• CONTRAST		• SHARPNESS
CAMERA		• CB_GAIN		• CR_GAIN
	LANGUAGE	• ENGLISH	• KOREAN	• CHINESE1 • CHINESE2	• JAPANESE
DOME	RESET
	EXIT
COLOR	12

INFORMATION

This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

WARNING

The manufacturer could void the user's authority to operate the equipment.

CAUTION - To prevent electric shock and risk of fire hazards:

Do NOT use power sources except for that specified.	DOME CAMERA
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should abide to all local codes.
	COLOR
3

3-Axis	1. SAFETY INSTRUCTIONS
	Read Instructions	Installation
	Read all of the safety and operating instructions	Do not place this product on an unstable cart, stand,
	before using the product.	or table. The product may fall causing serious injury
	Retain Instructions	to a child or adult, and damage to the product.
		Use only with a cart or stand recommended by the
	Save this instructions for later use.	manufacturer, or sold with the product.
	Cleaning	Mounting should follow the manufacturer's instructions,
		and should use a mounting accessory recommended
	Unplug this appliance from wall outlet before
		by manufacturer.
	cleaning. Do not use liquid cleaners or aerosol
	cleaners. Use a damp cloth for cleaning.	Power source
	Water and Moisture.	This product should be operated only from the type		CAMERA
	Do not use this product near water or moisture.	of power source indicated on the marking label.
	(For example. near a bathtub, wash bowl, kitchen	If you are not sure of the type of power supplied to		DOME
	sink, or laundry tub, in a wet basement, or near a	your home, consult your dealer or local power	5
	swimming pool,etc)	company.		COLOR

3-Axis	3. FEATURES
	High Sensitivity 1/3 Inch Sony Super HAD CCD
	Min. Illumination (F1.2, 30 IRE) : 0.1 Lux (Color)
	0.0 Lux (IR LED On)
	Day & Night (Programmable)
	OSD (On Screen Display)
	High Performance Menus For Functions
	• Privacy Zone Selectable (4 Programmable Zone)
	• Motion Detection Selectable (64 Programmable Zone)
	• Sharpness Enhanced Adjustable	CAMERA
	• Flickerless Selectable
	• Gamma Enhanced Selectable	DOME
	• BLC Zone Selectable (64 Programmable Zone)
		COLOR
	7

3-Axis	5. INSTALLATION
1	Stick the guide pattern on the wall or ceiling.	Ceiling
2	Drill four holes according to the guide pattern then	Guide Pattern
	insert anchors into the drilled holes.
3	Draw out power / video wires to the connecting places.	Dome Base
4	Fixed the camera to a celling using four screws.
5	Adjust desired focus and scene by turning and moving	Mounting
		Screw
	the 3-axis camera bracket by hand.

6Put the dome cover over the base.

7 Fix the dome cover on the base by covering.

	Dome Cover		CAMERA
NOTE
			DOME
Insert coin to the side hole and
		9	COLOR
remove the dome cover by twist coin.

3-Axis	7. NAME AND FUNCTIONS
		4
	6	5
	7
	1
	3
	2

	Camera Lay-out
1	Tilt rotation: Adjusting the vertical angle.
2	Pan rotation: Adjusting the horizontal angle.	CAMERA
3	Horizontal rotation: Adjusting the horizontal position of the screen.
4	Focus handle: Focus (Far or Near)
5	Zoom handle: Zoom (Tele or Wide)	DOME
6	IR LED(4mm~9mm): 850nm / 30°(20EA), Power Consumption(4.5W)
7	Sensor	11COLOR

Setting up the Menu

! Push the Joy stick for one second, and the OSD

	appears on the screen. Move the Joy Stick up, down,			SETUP
	left & right to control the OSD functions.
				- Push and hold MENU button 1 second
				to access the setup mode.
	UP SW1		MENU(SET):	• Select the status using the
				joystick. (up, down, left, right)
LEFT		RIGHT	SET BY JOY STICK
				SETUP
				CAMERA ID	OFF
	DOWN		J601	SHUTTER	AUTO ↙
			J603
			J102	WHITE BAL.	ATW
				FUNCTION	↙
			4
			J60	ADJUST	↙	CAMERA
	UP SW1		Use service monitor
				RESET	↙
			Service Monitor Connecter:	LANGUAGE	ENGLISH
J613
J611		UTP1	connector to set camera angle	EXIT		13COLORDOME
	LEFT	RIGHT	& focus when installing.

DOWN

Menu [WHITE BAL.] - WHITE BALANCE Mode Setup

1) WHITE BALANCE setup

①	In WHITE BAL., press LEFT, RIGHT button	AWB FIXED
	to select the mode you wish to operate
	ATW ◀ ▶ AWB ◀ ▶ FIXED ↙
	◀ ▶MANUAL ↙.	AWB FIXED : MODE 1

	2) FIXED ↙ setup		↙ : RETURN
	①	Can set from MODE 1 to MODE 4.
	3) MANUAL ↙ setup		AWB MANUAL
	①	As shown on the lower right picture,	RED	113
		set Red and Blue color value temperature.
CAMERA
		to exit from setup mode.
	②		BLUE	255
		Press MENU button in RETURN
COLOR DOME			↙ : RETURN
	18

Menu [FUNCTION] - BLC 1

1) BLC SETUP MODE

	①	Press MENU button in BLC ON ↙ ,	BLC SETUP
		to display the screen on the right side.	BLC AREA ↙
			BLC RATIO	16
	2) BLC AREA ↙ setup
			RETURN
	①	Use UP, DOWN, LEFT, RIGHT button
		to move the AREA setup position.
	②	Set or release BLC AREA
	③	using MENU button.
CAMERADOMECOLOR		Press MENU button for more than 1 second
	20	to move to BLC AREA MODE.

Menu [FUNCTION] - BLC 3

1)BLC RATIO setup (BLC LEVEL value setup)

①Use UP, DOWN button to move to BLC RATIO.

② Use LEFT, RIGHT button	BLC SETUP
to change BLC LEVEL value (0~63)	BLC AREA ↙
0:MIN , 63:MAX	BLC RATIO	16

③Press MENU button in RETURN

to move to FUNCTION MODE. RETURN

COLOR DOME CAMERA 22

Menu [FUNCTION] - DAY NIGHT 1

	1)	DAY NIGHT setup
		①	Move to DAY NIGHT screen on the right side.	FUNCTION
				BLC	OFF
		②	Change setting using LEFT, RIGHT button.	AGC	ON ↙
			AUTO ↙ ◀ ▶ B/W ↙ ◀ ▶ COLOR.	DAY NIGHT	AUTO ↙
				PRIVACY	OFF
				MIRROR	OFF
	2)	AUTO ↙ mode setup		GAMMA	0.45
				MOTION	OFF
		①	Press MENU button in AUTO ↙ setup mode.	RETURN
		②	Move to screen on the right side.	DAY NIGHT AUTO
		③	Select item using UP / DOWN button.	DELAY	01
CAMERA		④
			Adjust value using LEFT / RIGHT button.	START LEVEL	092
DOME		⑤	Press MENU in RETURN to return	END LEVEL	074
			to the previous screen.	RETURN
COLOR
	24

Menu [FUNCTION] - DAY NIGHT 3

1)B/W ↙ mode setup

①Press MENU in B/W ↙ setting

②Move to screen on the right side.

DAY NIGHT B/W

③Use LEFT, RIGHT button to set BURST ON / OFF.

BURSTON

④After setup, return to the previous screen by pressing MENU button.

COLOR DOME CAMERA 26

Menu [FUNCTION] - MIRROR

1) MIRROR setup

① MIRROR default setting OFF	FUNCTION
ON setting - Use LEFT, RIGHT button.	BLC	OFF
	AGC	ON ↙
② Left and Right side is switched	DAY NIGHT	AUTO ↙
	PRIVACY	OFF
as shown on the picture.	MIRROR	OFF
	GAMMA	0.45
	MOTION	OFF
	RETURN
OFF		ON

COLOR DOME CAMERA 28

Main Menu - FUNCTION

1)FUNCTION ↙ setup

①Press MENU button in FUNTION

to show the OSD display on the right.

FUNCTION

2)	Select item using UP, DOWN button.	BLC	OFF
		AGC	ON ↙
		DAY NIGHT	AUTO ↙
3)	Set details using LEFT, RIGHT button.	PRIVACY	OFF
		MIRROR	OFF
		GAMMA	0.45
		MOTION	OFF
4)	Click "Return" to go to MAIN SETUP	RETURN

CAMERADOME 19COLOR

Menu [FUNCTION] - BLC 2

1)BLC AREA MODE

①Exit from BLC AREA MODE

to move to BLC SETUP MODE screen.

2) BLC OSD description		BLC AREA
		ALL CLEAR
①	ALL CLEAR - Clear all set AREA
		ALL SET
②	ALL SET - Set all 64 BLC AREA	RETURN
		EXET

③RETURN - Return to BLC AREA setup mode.

④EXIT - Save AREA and return to

BLC SETUP MODE.

CAMERADOME 21COLOR

Menu [FUNCTION] - AGC

1)AGC setup

①AGC default setting ON ↙

②	Press MENU button in ON ↙	AGC CONTROL
	to display the screen on the right side.
③	Use LEFT, RIGHT button	AGC GAIN	095
	to adjust AGC GAIN value (0~255)
	0:MIN , 255:MAX

↙ : RETURN

④Press MENU button to return to the previous screen.

CAMERADOME 23COLOR

Menu [FUNCTION] - DAY NIGHT 2

1) DAY NIGHT OSD description

①DELAY

DAY --> NIGHT or NIGHT --> DAY conversion time setup 0 : No DAY NIGHT AUTO conversion

1~63 : Can set from 1 second to 15 seconds

②START LEVEL

DAY --> NIGHT conversion illumination intensity setup 0~255 (DEFAULT : 4 Lux)

0 : High illumination intensity, 255 : Low illumination intensity

!	Initial value setup is recommended.
③ END LEVEL			CAMERA
	NIGHT --> DAY conversion illumination intensity setup 0~255 (DEFAULT : 12 Lux)
	0 : High illumination intensity,	255 : Low illumination intensity	DOME
!	Initial value setup is recommended.
			25COLOR

			Menu [FUNCTION] - PRIVACY
1)	PRIVACY setup
	①	Default setting OFF - Use LEFT,RIGHT button.	FUNCTION
		Change setup to ON ↙ mode.	BLC	ON ↙
	②	After ON ↙ mode setup, 4 AREA groups are	AGC	ON ↙
			DAY NIGHT	AUTO ↙
		configured as displayed on the right-side picture.
			PRIVACY	ON ↙
	③	Press MENU button.	MIRROR	OFF
			GAMMA	0.45
		Details of each area is dsplayed.
			MOTION	OFF
			RETURN
2)	PRIVACY details setup
	①	Select AREA SEL - PRIVACY 0~3.	PRIVACY
	②	AREA STATE - 0~3 AREA ON/OFF
			AREA SEL	AREA 0
	③	LEFT - Change left portion of each AREA size.
			AREA STATE	ON
	④	RIGHT - Change right portion of each AREA size.	LEFT	017	CAMERA
			TOP	020
			RIGHT	058
	⑤	TOP - Change top portion of each AREA size.	BOTTOM	055	DOME
	⑥	BOTTOM - Change bottom portion of each AREA size.	COLOR	001
	⑦	COLOR - Change entire color of the AREA (16 COLOR)	RETURN		27COLOR

Menu [FUNCTION] - GAMMA

1) GAMMA setup (DEFAULT 0.45)

① In FUNCTION MODE,	FUNCTION
use UP, DOWN button to select GAMMA.	BLC	OFF
	AGC	ON ↙
② Use LEFT, RIGHT button	DAY NIGHT	AUTO ↙
	PRIVACY	OFF
to adjust GAMMA value.	MIRROR	OFF
(USER ◀ ▶ 0.05 ◀ ▶ 0.10 ◀ ▶ 0.15 ~ 1.0)	GAMMA	0.45
	MOTION	OFF
	RETURN

CAMERADOME 29COLOR

Main Menu - LANGUAGE

1) LANGUAGE setup

①	DEFAULT value - ENGLISH
②	After selecting LANGUAGE,	SETUP
	change setting using LEFT or RIGHT button.
		CAMERA ID	OFF
③	Choose the language mode you	SHUTTER	AUTO ↙
		WHITE BAL.	ATW
	wish to operate in.	FUNCTION	↙
		ADJUST	↙
		LANGUAGE	ENGLISH
		RESET	↙
		EXIT

CAMERADOMECOLOR	!	ENGLISH ◀ ▶ Korean ◀ ▶ Chinese1 ◀ ▶ Chinese 2 ◀ ▶ Japanese
	34

3-Axis		9. SPECIFICATIONS
		MODEL	H D 6 1	H D 6 1 X
		Signal System	NTSC	PAL
		Image Sensor	2:1 Interlace Transfer 1/3 Inch Super HAD CCD
		Effective Pixels	510(H) x 492(V)	500(H) x 582(V)
		Video Output	Composite: 1.0Vp-p, 75Ω, Unbalanced
		Sync. System	Internal Sync
		Luminance S/N Ratio	More than 50dB (AGC OFF)
		Horizontal Resolution	380 TV Lines
		Min. Illumination (F1.2)	0.1 Lux(30IRE, AGC ON), 0 Lux(IR LED)
		Lens	Manual Vari-focal (f=4~9mm)
CAMERA		Focus	Manual
		White Balance	ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual
		Electronic Shutter	1/60 ~ 100,000	1/50 ~ 100,000
DOME		Camera ID	ON / OFF
COLOR	36	Language	English / Korean / Chinese 1 / Chinese 2 / Japanese

3-Axis 10. TROUBLESHOOTING

If you have trouble operating your camera, refer to the following table.

If the guidelines do not enable you to solve the problem, contact an authorized technician.

		P r o b l e m	S o l u t i o n s
		Nothing appears on the	• Check that the power cord and line connection between the camera and monitor
		screen.	are fixed properly.
			• Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
		The image on the screen	• Is lens stained with dirt? Clean your lens with soft, clean cloth.
		is dim.	• Set the monitor to proper condition.
			• If the camera is exposed to too strong light, change the camera position.
			• Adjust the lens' focus properly.
		The image on the screen	• Adjust the contrast feature of the monitor.
		is dark.	• If you have an intermediate device, set the 75Ω/ Hi-z properly.
			• Adjust DC Level, on the OSD menu.
CAMERA		The camera is not working	• Check that you have properly connected the camera to an appropriate power source.
		properly, and the surface
		of the camera is hot.
DOMECOLOR	38	The image on the screen	• Is the camera facing to direct sunlight or fluoresent lighting?
		flickers.	Change the camera position.

	Main Menu - RESET
1) RESET
① Select RESET.	SETUP
	CAMERA ID	OFF
Press MENU button.
	SHUTTER	AUTO ↙
The screen on the bottom appears.
	WHITE BAL.	ATW
② Select YES or NO.	FUNCTION	↙
	ADJUST	↙
	LANGUAGE	ENGLISH
③ Select YES to reset your camera	RESET	↙
	EXIT
to default factory condition
	LOAD DEFAULT
	YES	35COLORDOMECAMERA
	NO

BLC, AGC	ON / OFF (Level Adjustable)
Day & Night	BW / Color / Auto
Privacy	ON / OFF (4 Programmable Zone)
Mirror	ON / OFF (Horizontal)
Gamma	User / 0.5 ~ 1.0 Adjustable
Motion Detection	ON / OFF (64 Programmable Zone)
Contrast	0 ~ 255 (Level Adjustable)
Sharpness	0 ~ 31 (Level Adjustable)
Applicable Lens	Manual Lens
Supply Voltage	12VDC (10V~15V)
Power Consumption	Max. 4.5W / 360mA
		CAMERA
Storage Temperature	-20℃~+60℃
Operating Temperature	-10℃~+50℃(Recommendation: -5℃~+40℃)
		DOME
Dome Size (Ø)	100 mm
Weight	Approx. 366g	37COLOR

3-Axis . Memo

CAMERADOME 39COLOR

		Main Menu - SETUP					Main Menu - CAMERA ID
					1)	CAMERA ID setup (default setting OFF)
	1. Press MENU button, then SETUP mode is activated.					①	Press MENU key in ON ↙ state.
							(Access ID setting MODE)
	• MAIN SETUP menu is displayed on the monitor.
						②	Press MENU key in CAMERA ID.	ID SETUP
			SETUP
	2. Select OSD item using UP, DOWN button.		CAMERA ID	OFF		③	Character is changed each time UP, DOWN is	CAMERA ID
			SHUTTER	AUTO ↙			pressed. (Can select up to 63 letters)
								A	↙ C
			WHITE BAL.	ATW
			FUNCTION			④	Press MENU button in ↙ to	_
	3.	Set details using LEFT, RIGHT button.		↙				POSITION
			ADJUST	↙			exit from ID setup mode
			LANGUAGE	ENGLISH		⑤	Press MENU button in 'C' to correct and erase	RETURN
			RESET	↙
	4.	Select "Exit" and then press the MENU button					the chosen entry.
			EXIT
		to finish the SETUP (Save and Exit)			2)	POSITION setup. Press POSITION ↙.
CAMERA										CAMERA
						①	Move the character using UP, DOWN, LEFT, RIGHT button.
DOME										DOME
						②	Press Menu button to confirm selection of the character.
COLOR	14					③	Press Return to go to previous screen. ID is displayed by pressing EXIT on MAIN MENU.			15COLOR

Menu [FUNCTION] - MOTION

	1)	MOTION DETECTION setup
		①	DEFAULT value OFF		FUNCTION
		②	In ON ↙ , press MENU button.		BLC	OFF
					AGC	ON ↙
		③	Display MOTION details.		DAY NIGHT	AUTO ↙
					PRIVACY	OFF
					MIRROR	OFF
	2)	AREA ↙ setup			GAMMA	0.45
		①	In AREA ↙ , press MENU button. (see p.31)		MOTION	OFF
					RETURN
	3)	MOTION TH. Setup
		①	Set motion sensitivity 0(MAX)~255(MIN)		MOTION
	4) MOTION TRACE setup				AREA ↙
CAMERA
		①	ON : Display motion detection AREA.		MOTION TH.	037
DOME			!	Setting value can be adjusted	MOTION TRACE	OFF
COLOR				using LEFT or RIGHT button.	RETURN
	30

Menu [FUNCTION] - MOTION AREA 1

1) MOTION AREA setup

① Use UP, DOWN, LEFT, RIGHT button to move AREA setting position.

②Use MENU button to set and release AREA.

③Press MENU button for more than 1 second to move to MOTION AREA MODE

2) MOTION AREA MODE
① You will return to MOTION AREA MODE	MOTION	AREA
after "Exit" from MOTION AREA MODE.	ALL CLEAR
	ALL SET		CAMERA
	RETURN
	EXET		31COLORDOME