Turning Power On

To turn the terminal On, press and release the Power button .

Suspend Mode

Press and release the Power button to toggle the terminal in or out of Suspend Mode.

Because the display is hidden in the belt mount sled, observe the backlights for the Send, Home, Back and End keys. When the Dolphin 70e Black is on, these keys are backlit. If the keys are not backlit, the terminal is Off or in Suspend mode.

Note: You should always place the terminal into Suspend mode before removing the battery.

Pairing the Bluetooth Ring Scanner (Optional)

Prior to this step, the system administrator must have configured EZ Pairing.

Pair the Bluetooth Ring Scanner before placing the terminal in the sled.

1.Touch > Power Tools > EZ Pairing.

2. The EZ Pairing bar code is displayed on

the screen. If using a 2D imager ring scanner, scan the on-screen bar code or

the bar code label on the back of the terminal with the Bluetooth Ring Scanner.

If using a 1D ring scanner, scan the bar

code from the label on the back of the terminal.

3.Listen for the confirmation beeps.

4.Confirm the scanner is connected by observing the EZ Pairing icon on the terminal display. When the icon is green, the scanner is connected . If the icon is red, the scanner is not connected. Scan the bar code again.