Honeywell HWC-BELT-WEH-QS Placing Dolphin 70e Black into the Sled

5.If the scan wedge icon is displayed, scan wedge is running. If the scan

wedge icon is not displayed, Touch > Power Tools > ScanWedge NGW. Tap Yes if a message is displayed about continuing without a tethered scanner connected.

EZ Pairing icon

Scan Wedge NGW icon

Placing Dolphin 70e Black into the Sled

1. If the end cap is installed on the sled, slide the lock down to release the end cap.

2. Push up on the right side (the side with the lock) of end cap. Do not attempt to remove the end cap without sliding the lock first!