ASSEMBLY

•Remove the Handle from the box.

•Place the heater on a firm, level floor.

•Line up the prongs on the bottom of the handle with the openings on the top of the heater and firmly push down (Fig. 1). The handle is now permanently fastened to the top cover.

Fig. 1

SET-UP

• Place the heater on a firm, level, open surface free from

Fig. 2

 

obstructions and at least 3 feet (0.9m) away from any wall or any

 

 

 

combustible material. DO NOT use on an unstable surface such as

 

 

bedding or deep carpeting. BE SURE THE HEATER IS NOT IN A

 

 

POSITION WHERE IT MAY BE TRIPPED OVER BY SMALL

360° Heating

Forwad Only

CHILDREN OR PETS.

• The Tower Surround Heater is designed to disperse heat in either a

 

Heating

 

(One Direction

360° range or in one direction only.

 

 

Heating)

 

 

•To select the desired heating mode, slide the Direction Control

switch, located on the top of the heater, to the position of your choice (Fig. 2):

–to the left (full circle) for 360° Heating

–to the right (half circle) for Forward Only Heating (One Direction Heating)

OPERATION

• Select the appropriate heat dispersion mode (See Set-Up).

Fig. 3

 

•With the Power knob in the OFF (O) position, plug the heater into

a polarized 120V outlet.

•Turn the Thermostat control fully clockwise to the HIGH setting.

•This heater is equipped with three different heat settings. The

Low setting (I) uses 600 watts of power, the Medium setting (II) uses 900 watts of power and the High setting (III) uses 1500

watts of power. You can select the proper setting to accommodate your comfort level. Because the Low and Medium

heat settings do not require as much electricity to operate, they

are more energy efficient and may be better options if you are concerned about the amperage draw on a circuit when the heater is in the High setting.

•Turn the heater on using the Child Resistant switch (Power knob). To operate the switch, push down the two sides of the Power knob while turning it clockwise to the desired position (Fig. 3). The power light will illuminate. The Child Resistant switch helps to keep the heater from being turned on unintentionally.

•When the room reaches a comfortable temperature, slowly turn the Thermostat control counter- clockwise until the heater goes off. This is the point at which the Thermostat setting equals the room temperature. At this setting, the Thermostat will automatically turn the heater on and off to maintain this selected temperature.

•Push down and turn the Power knob to OFF and unplug the heater when you are finished using it.

ELECTRICAL RATING

This product is rated 12.5 Amps (1500 watts) @ 120V, 60Hz

Page 1 Page 3
Page 2
Image 2
Honeywell HZ-3200 important safety instructions Assembly, Set-Up, Operation, Electrical Rating
Page 1 Page 3

HZ-3200 specifications

The Honeywell HZ-3200 is a versatile and efficient heating solution designed to enhance comfort in various indoor environments. This innovative portable heater is particularly suitable for those seeking a balance between performance, safety, and energy efficiency.

One of the main features of the HZ-3200 is its powerful heating capability. With a high-output design, it can quickly warm up spaces of medium size, making it ideal for living rooms, bedrooms, or offices. Its adjustable thermostat allows users to control the temperature easily, ensuring that the desired warmth is achieved and maintained throughout use.

The Honeywell HZ-3200 includes several safety features, addressing common concerns associated with portable heaters. It is equipped with an overheat protection mechanism that automatically shuts off the heater when it reaches a certain temperature, preventing potential fire hazards. Additionally, the unit has a tip-over switch that activates if the heater is accidentally knocked over, further enhancing its safety profile. This combination of safety features makes it a reliable choice for families with children and pets.

Another important characteristic of the HZ-3200 is its user-friendly design. The heater is lightweight and portable, allowing users to easily move it from room to room as needed. It also features a sleek aesthetic that complements various home decors, without being intrusive.

In terms of technology, the Honeywell HZ-3200 boasts an efficient heating element that maximizes energy output while minimizing energy consumption. This efficiency not only reduces electricity bills but also makes it an environmentally friendly option compared to traditional heating methods.

Furthermore, the heater operates quietly, ensuring that it does not disturb daily activities such as reading, working, or sleeping. This makes it an ideal companion for both residential and commercial spaces where noise levels need to be kept to a minimum.

Overall, the Honeywell HZ-3200 is an exceptional portable heater that combines power, safety, efficiency, and ease of use. Whether for a chilly evening at home or to provide additional warmth in an office setting, it meets the needs of users seeking dependable heating solutions. Its thoughtful design and advanced features position it as a top choice among portable heating options on the market today.
Top Page Image Contents