Honeywell HZ-614C These Instructions, HZ-817SERIES OPERATION, Power Button Power Indicator Light

15.Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be No. 14 AWG minimum size and rated not less than 1875 watts. The extension cord shall be a three wire cord with a grounding-type cord and plug connector.

16.This heater draws 12.5 amps during operation. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working.

17.It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlets.

18. Never tamper with this product or attempt to fix it. Any tampering with, or modification of this product can result in serious injury, death, fire or risk of electric shock. Do not open, no user serviceable parts inside.

19. Do not remove product labels that contain warnings or safety instruction.

20. The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.

21. SAVE

THESE INSTRUCTIONS

HZ-817 SERIES OPERATION

•	Place the heater on a firm, level, open surface free from
	obstructions and at least 3 feet (0.9 m) away from any
	combustible materials.
•	Never leave an operating unit unattended.
•	Plug the heater into an electrical wall outlet.
•	Touch the power button to turn the heater on.
	The power indicator light will illuminate. (Fig. 3)
•	To save up to 35% in energy bills, turn the Energy Smart™
	knob to your desired temperature. There are four distinct
	settings of 65°F/18°C, 70°F/ 21°C, 75°F/23°C, and
	80°F/26°C. The Energy Smart™ heater will automatically
	select the appropriate power level to best accommodate
	your desired temperature. As the air temperature in
	the room approaches the set temp, the heater will

Fig. 3

Control Quick

Knob Heat

Power

Button

Power Indicator Light

IMPORTANT SAFETY INSTRUCTIONS REGARDING THE PLUG ON YOUR PRODUCT

Fig. 1

automatically lower the power consumption and provide

consistent warmth without wasting energy.

•The illuminated LED lights will indicate what the current room temperature is.

•This heater is equipped with a “frost watch” which automatically turns the unit on if the temperature drops below 55°F/12°C degrees

•To override the Energy Smart™ feature and produce maximum heat, turn the knob fully clockwise to “High”. This will produce 1500W of heat at all times.

QUICK HEAT® FEATURE

Quick Heat® will propel a steady blast of warm air out of your baseboard. This can help heat your room more quickly. You will hear a fan operating in this mode. You can also turn the Quick Heat® setting off and the heater will operate silently.

HZ-614, HZ-615, & HZ-617 SERIES OPERATION

• Place the heater on a firm, level surface away from any	Fig. 2
combustible material.

•With Power knob in the OFF position, plug the heater into a grounded outlet.

•Turn the thermostat knob fully clockwise to the high setting.

•To turn the heater on, turn the Power knob clockwise to the ON position. (Fig. 2).

•If you want to use the Quick Heat® feature, turn the Power knob to the Quick Heat® Setting.

•When the room reaches a comfortable temperature, slowly turn the thermostat control counter-

clockwise until the heater goes off. This is the point at which the thermostat setting equals the room temperature. If left at this setting, the thermostat will automatically turn the heater on and off to maintain the selected temperature.

www.sylvane.com (800) 934-9194

SAFETY FEATURES

This heater is equipped with several devices and features for added protection.

•A high temperature safety control prevents overheating

(Hi Limit).

•A back-up thermal circuit breaker that will permanently shut down the heater should it operate at higher than normal temperatures (HZ-614, HZ-615, HZ-617 and HZ-817 only).

•A SafeGuard™ Alert Heat Indicator Badge that indicates the grille is hot and should not be touched - turns from black to red (HZ-614C, HZ-617, HZ-617C and HZ-817 only).

•Tip-over switch feature - The HZ-817 SERIES ONLY is equipped with a tip-over switch that disables the heater if it is tipped over. To restore power to the heater, stand the heater up properly and press the power button.

•A three-prong grounded plug.

•This heater was created using a high quality safety plastic.

Fig. 4
	Heat Indicator
	Badge

Do not touch the grille until the unit has been turned off and the SafeGuard™ Alert Badge has turned back to black.