Honeywell IFS-2600 Technical Description, General, Transient Suppression, Current Consumption

Models: IFS-2600

1 80
Download 80 pages 42.74 Kb
Page 15
Image 15

IFS-2600Installation & Programming Manual

Page 11

TECHNICAL DESCRIPTION

GENERAL

The IFS-2600 in its most basic form comprises of three boards, the main control board, the main termination board and the power supply board.

The main control board contains the Microprocessor, EPROM, RAM and E2ROM. The main control board also has the liquid crystal display and keypad attached. All of the "delicate" electronics have been placed on this board. The main control board complete with the inner door is easily removed during installation to avoid damage and allow greater access to the field terminals.

The main termination board contains the one power supply for 5V logic, and connectors for a Power Supply and Battery Charger daughter board, the first eight zones, all common outputs and the printer interface. All charger settings, fuses etc are located on this board. The Power Supply and Battery Charger board contains two switch mode regulators, 26.5V for the panel power, 27.3V for the battery charger.

Up to seven (7) zone expansion boards can be added to the system to increase its detection capability. These boards contain the same electronics as on the main termination board for zone scanning. Addressing is by a jumper that selects which group of eight zones the board refers to.

Up to four (4) zone indicator boards can also be added. These boards will display the status of the zone expansion boards fitted.

Up to eight (8) relay boards can be added. These boards contain 8 change-over relay contacts, each rated at 1 amp. These boards require no addressing, as they work on a serial data chain. Output 1 is the closest output to the main board.

NOTE This product utilises state of the art components and materials and therefore boards must be returned to our factory for proper troubleshooting, repair and retesting. Field component level repairs are not recommended and would void all warranties on the product.

TRANSIENT SUPPRESSION

The IFS-2600's superior transient protection comprises of Dual Transorb input traps, inductive paths on incoming PCB tracks, circuit board planes and metal oxide varistors on outputs. These devices are all self- resetting.

CURRENT CONSUMPTION

Zones Fitted

Quiescent Current

Quiescent + 2 AZF'S in alarm +1A of Bell +1 Amp ACF

8

150 mA

2.23 AMPS

16

250 mA

2.33 AMPS

24

350 mA

2.43 AMPS

32

450 mA

2.53 AMPS

40

550 mA

2.63 AMPS

48

650 mA

2.73 AMPS

56

750 mA

2.83 AMPS

64

850 mA

2.93 AMPS

Note:

1:Each installation would require individual battery calculations to be performed for load capacity and power supply capacity.

2:Each IFS-717 relay board, can add 370 mA (in alarm and quiescent) current per board.

P/N 10069 ECN08-0066

Page 15
Image 15
Honeywell IFS-2600 installation manual Technical Description, General, Transient Suppression, Current Consumption

IFS-2600 specifications

The Honeywell IFS-2600 is a cutting-edge portable data collection device that has gained recognition for its robustness and efficiency in various industrial settings. Designed to enhance productivity in rugged environments, the IFS-2600 is a powerful tool for data acquisition and operational optimization.

One of the key features of the Honeywell IFS-2600 is its advanced scanning technology. It is equipped with a superior imaging engine that provides high-speed scanning capabilities. This makes it ideal for scanning barcodes, even in challenging conditions. The ability to read both 1D and 2D barcodes ensures versatility in applications ranging from inventory management to shipping and receiving.

Another significant characteristic of the IFS-2600 is its rugged design. Built to withstand harsh conditions, this device is compliant with military-grade specifications and offers an impressive drop resistance. It is capable of enduring extreme temperatures, humidity, and dust, making it suitable for use in warehouses, manufacturing plants, and outdoor environments.

The IFS-2600 also boasts a user-friendly interface. Featuring a high-resolution display with touchscreen capabilities, users can easily navigate through applications and access necessary data. The device is designed for efficiency, allowing users to efficiently input information and manage tasks.

Connectivity is another prominent aspect of the Honeywell IFS-2600. With support for multiple communication protocols, including Wi-Fi, Bluetooth, and cellular options, the device ensures seamless integration into existing workflows. This connectivity allows real-time data transmission to central systems, enhancing decision-making capabilities and operational oversight.

Battery life is crucial for a portable device, and the IFS-2600 does not disappoint. It is equipped with a high-capacity battery that supports prolonged usage without frequent recharging. This makes the device perfect for long shifts, ensuring that employees can continue working without interruptions.

In summary, the Honeywell IFS-2600 is a formidable solution for businesses aiming to improve their operational efficiency through advanced data collection. With its robust scanning technology, rugged design, user-friendly interface, versatile connectivity options, and long-lasting battery life, it equips organizations with the tools necessary to thrive in an increasingly competitive market. This makes it an invaluable asset for industries such as logistics, manufacturing, and retail.