54
SCANNER AND CABLE TERMINATIONS
SCANNER PINOUT CONNECTIONS
The StratosH scanner terminates to 10-pin modular jacks located on the bottom of the unit. The serial number label indicates
the model number and interface of the scanner. When using the RS232/Full Speed USB/RS485 (-121) interface, the USB and
RS485 interfaces are not active at the same time.

EAS In

Auxiliary RS232 In

Pin Function
Pin Function
1 EAS In 1 Ground
2 EAS Out 2 RS232 Receive Input
3 RS232 Transmit Output

DC Power In 4 RS232 RTS In

Pin Function 5 RS232 CTS Out
1 12VDC
6-8 No Connect
2 Ground 9 +5V Out
3 5.2VDC
10 No Connect
Figure 70. Connector Layout on the Bottom of the Scanner
Scanner RS485

to Host Scanner RS232 to Host

Pin Function Pin Function
1 Signal Ground 1 Signal Ground
2 RS232 TX Output 2 RS232 TX Output
3 RS232 RX Input 3 RS232 RX Input
4 Reserved for RS232 Interface 4 RS232 RTS Output
5 Reserved for RS232 Interface 5 RS232 CTS Input
6 Reserved for RS232 Interface 6 RS232 DTR Input
7 IB M B- 7 Reserved for RS485
8
Interface
IBM B+ 8 Reserved for RS485
9
Interface
No Connect 9 No Connect
10 No Connect 10 No Connect

Scanner USB to Host

Pin Function
1 Signal Ground
2 Reserved
3 Reserved
4 Reserved
5 Reserved
6 Data +
7 PC+5VDC
8 Data -
9 No Connect
10 Shield Ground
Specifications are subject to change without notice.