21
INSTALLATION
CABLE INSTALLATION (INTERFACE SPECIFIC)
FULL SPEED USB
Step 8 is for USB Serial Emulation Mode or Keyboard Emulation Mode only.
8. Configure the StratosH for Bi-Directional USB Serial Emulation Mode or USB Keyboard Emulation Mode by scanning the
appropriate configuration bar codes in the USB section of the MetroSelect Configuration Guide (PN 00-02407x).
Step 7 must be completed before continuing to step 8 for these features to work properly.
xxx* Specifies international connection. See Optional Accessories in the Introduction section
of this guide for a complete listing.
See power source caution statement on page 11 of this manual.
Figure 23. USB Cable Installation Schematic