29
SCANNER OPERATION
IR ACTIVATION AREA (IR LED OUTPUT)
The StratosH’s default power save mode† is Dual Action Power Save Mode #2 (see page 34). This power save mode†
turns the laser OFF after a configured period of non-use then turns the motor OFF after thirty-minute intervals. Any movement detecte d
by the IR in the activation area, shown below, will cause the scanner to exit the power save mode. The motor will restart automaticall y
and the laser will turn back on preparing the scanner for bar code recognition, decoding and transmission.
Figure 32. IR Activation Area Perpendicular to Package Flow (IR LED Output)
†
Refer to the MetroSelect Configuration Guide (00-02407) for additional information on configurable power save modes.
Specifications are subject to change without notice.