ActiveSync using USB-Client Connection

The only connection type is USB Client.

1.Connect the MX7 Tecton end of the USB cable to the I/O port on the bottom of the MX7 Tecton.

2.Connect the USB type A connector on the I/O cable to a USB port on a PC or laptop.

ActiveSync starts automatically when the USB cable is connected.

When the MX7 Tecton loses connection (e.g., enters Suspend Mode), the connection to ActiveSync will be temporarily lost. When the MX7 Tecton resumes, the ActiveSync session will automatically re-connect.

Please refer to the MX7 Tecton Reference Guide for ActiveSync information.